Tim Maloney: Activity About
Tim Maloney

Member Since:
July 1st 2003
239 Posts
100 posts
Rec Start Stop trigger from SDI spigot
by Tim Maloney 11 years ago
Hello all, I am intrigued by the prospect of using a Sound Devices 788T as my Sound recording device. Since the dawn of Camcorders, we have struggled to get more audio channels onto the recorded media
Rec Start Stop trigger from SDI spigot
by Tim Maloney 11 years ago
Hi Noah, Not intending to be one man band in fact I insist on using at least a Sound Guy and assistant where possible. Don't know where that came from My dilemma is I want to roll the 788T when I want
P2 Portable AG-HPG20 - No flagged frames support
by Tim Maloney 11 years ago
Hello all, Followed a thread below where people were trying to record 10 bit out of the HDSDI spigot from the Varicam. Of course ( at least our early model ) does out put 10Bit - with the flagged fram
Re: P2 Portable AG-HPG20 - No flagged frames support
by Marcus van Bavel 10 years ago
Charles Binn "one more question. Will the AG-HPG20 also remove the not tagged frames from 720 25p over 60p If it removes the not tagged frames what will be stored 720 25p " The HPG20 records 720 60P
software vision switcher
by Tim Maloney 11 years ago
Hello all, We are doing a sports coverage job and during the shoot the client wants to mix the wide shot camera with graphics info etc and put it on a big screen. Any one know of a software package wi
Software Vision switcher
by Tim Maloney 11 years ago
Hi Jeremy, As I mentioned the job is at a sporting event. I have the Kona 3 in our colour suite and wanted to avoid pulling it apart to set up at a water skiing event in the dust etc. I guess I was ta
Vision switching on Mac
by Tim Maloney 11 years ago
Hi, We are doing a sports coverage job and the client want to mix the wide shot camera with graphics etc and put it on a big screen. Any one know of a software package with SDI capabilities to vision
GPS as Time of day Code
by Tim Maloney 11 years ago
Hello all, I agree with the other posters that the tutorial by Jeremy was enlightening and really made us here at Axis think about the power of prepping the original P2 media metadat prior to ingest.
Re: GPS as Time of day Code
by Jeremy Garchow 11 years ago
There are separate GPS units available for some camera. The HPX2000 can support it, as can the 3000. Other than that, I am not sure. *Edit* as far as tod tc, why would you need that Just curious. If y
AJ-YAX800G Proxy Card Generator
by Tim Maloney 11 years ago
Hello all, I've got one of these cards in my HPX3000. It Bugs me that FCP cant see the universal identifier embedded in the proxy file. I want to do as I intended and email the clips from location to
Re: AJ-YAX800G Proxy Card Generator
by Bjoern Adamski 11 years ago
An UID won't help here. - The P2 proxies have only 2 audio clips and no timecode which would popup a message in FCP when trying to reconnect the 4 channel hi-res files but this is still manageable. -
Varicam Slow motion
by Tim Maloney 11 years ago
Hello All, I've got some varicam footage shot at 60 fps ( 60 HZ ) shutter 180 degrees. I've got in 108050i after using the Frame Rate converter or DVCPRO50 codec. Whats the best way to slow it down an
Re: Varicam Slow motion
by david bogie 11 years ago
Any of those will work. Your term "best" is meaninglessly relative, so is s"mooth" since you have included free-and-easy as well super expensive options. The choice of method is secondary to your imag
P2 AVC100 108050i 25fps into Avid
by Tim Maloney 11 years ago
Also posted in Avid Editing Hi all, I've got a client of mine who is using Avid MC 2.8.3 and I've sent him some material shot on P2 AVC Intraframe 100 108050i 25fps. Is his version of MC advanced enou
P2 AVC Intraframe 100 108050i 25fps
by Tim Maloney 11 years ago
Hi all, I've got a client of mine who is using Avid MC 2.8.3 and I've sent him some material shot on P2 AVC Intraframe 100 108050i 25fps. Is his version of MC advanced enough He needs a plugin from Pa
Re: P2 AVC Intraframe 100 108050i 25fps
by hector lopez 11 years ago
Not sure about 2.8, but this definitely works on any 3.0 system. Hector
Camera Cover HPX3000
by Tim Maloney 11 years ago
Hello All, Trying to choose a camera cover glove for a HPX3000: I've looked at a Kata CG-12 and a Porta Brace CBA-HPX2000 Camera Body Armor. The Kata looks snug and discreet but I worry about ventilat
Camera Cover HPX3000
by Tim Maloney 11 years ago
Thanks Guys, For now its the Kata CG-12 Thanx Tim
P2 Rebuild
by Tim Maloney 11 years ago
Hello all, Following on from the thread below. I've found a Windows laptop, loaded the P2 drivers so as the PC can see the P2 and it mounts as an Edrive. I can see a set of volumes in there some of wh
What the??/\\
by Tim Maloney 11 years ago
OK so I shot a short spot this morning on my HPX 3000. 1050i intra frame 100 25fps shutter1 50. Chose slot 1 for the recordings. Shoot went well replaying takes etc to the client. Thumbnail window ful
P2 Card gone awol
by Tim Maloney 11 years ago
Thanks Guys, So the file structure has been upset. Restore demo is for windoze. Will disk warrior sort it out on the mac Tim
Blu Ray ingest to Kona 3
by Tim Maloney 11 years ago
Hi All, How can I ingest material from a Sony BDP-S300 Blu Ray Player. It has component out Y- Green PB CB - Blue PR CR - Red Can I plug it into the Kona three Can I crack the disk into something FCP
Re: Blu Ray ingest to Kona 3
by Chris Borjis 11 years ago
tim it won't work at all if it has any kind of copy protection. burnable discs should work though.
Card from EX1 won't mount???
by Tim Maloney 12 years ago
Hello all, Got some material on a 16 GB card from day one of a shoot. I don't want to go into FCP - just copy to a little firewire drive I brought with me. Place it in the express34 card slot BUT it d
Card from EX1 will now mount!!!!
by Tim Maloney 12 years ago
Hello all, So I got this link http: www.sony.ca promedia drivers.htm And all was well using the finder to drag and drop. I've got copies on my MBP and the firewire for safety. Also browsed using xdcam
Pixel Masking
by Tim Maloney 12 years ago
Hello All, I've got a 709 Digibeta with some bad glowing pixels. Post House uses AVID. I want to buy them a plug in that can mask the pixels so as I don't have to spend nearly A$4,000.00 software fixi
Re: Pixel Masking
by Tim Maloney 12 years ago
Thanks Grinner, I know nothing about this process. Our camera is one of seven in the Audition phase of Australian Idol. Is this something that can be applied in the online: 1 Simply. IE set up once th
Kona 3/I/OHD
by Tim Maloney 12 years ago
Hello all, Have I got this right The AJA IO HD is designed to support HD VTR's offering HDSDI into Mac Pro's and MacBook Pro laptops by transcoding to the 422 ProRes HQ codec. There are no alternative
Re: Kona 3/I/OHD
by Bob Zelin 12 years ago
I specify the I O HD for all new systems -this is based on "bang for the buck", for most users. In my opinion, there is no question that the BEST AJA system is the combination of an AJA Kona 3 with th
MXF?????
by Tim Maloney 12 years ago
Hello all, I went to a demo today of P2 technology. Works well - I like the HVX3000 using the AVC codec All the time the guy is referring to MXF allowing all of these cool things in import and archivi
Up Rezzing Pal SP footage
by Tim Maloney 12 years ago
Hello all, Got a project from a while back that I want to bring into HD space now. Sorted now with Automatic Duck. I have to mix it with Varicam 25fps @60HZ that I've been shooting more recently ( Che
Avid Media Composer 11 project to Final Cut
by Tim Maloney 12 years ago
Hello all, Have to bring an old project from 9 years ago into the present. 44 minute documentary made on Avid media composer 11. I want to rebuild it then cut it down for a new project. Will the Autom
Thanks
by Tim Maloney 12 years ago
Thanks Guys, I'm off to talk to Wes. I seem to remember asking for an old fashioned submaster of this show ie natural sound no graphics etc - but I didnt get it way back then. That would have done fin
Control Panel for Color
by Tim Maloney 12 years ago
Hello all, I am looking to get a controller for the Color Section of FCP6. The choice is JL Cooper or Tangent I guess. There are lots of options offered from each supplier ie track balls and different
Re: Control Panel for Color
by Richard Dee 12 years ago
I dont know if Tangent works with FCP 6, but My JL Cooper Spectrum does. You need to contact JL Cooper to get the beta drivers. The rings work really well for low mids and high, but the balls can be a
LCD grading monitor/FCS2colour/JLCOOPER
by Tim Maloney 12 years ago
Hello All, Looks like all the tools are in place to create an excellent grading option for our larger FCP Room. For FCS 2 I can get a Tangent Cooper control surface, a software scope, and a LCD. We ha
Re: LCD grading monitor/FCS2colour/JLCOOPER
by Tom Bridges 12 years ago
walter biscardi "eCinema has a $24,000 LCD display that is supposed to be a "true CRT replacement." It was not in the booth when I went by, but Shane Ross did see it." I was looking out for this spec
Long firewire connection??
by Tim Maloney 12 years ago
Hello all, Little off topic but there are some excellent technical minds on this forum!! I did a great recording from a HV10 to a Sony HDV camera the other day using a 4 Pin five meter cable I purchas
Re: Long firewire connection??
by Jeremy Garchow 12 years ago
Tim Maloney "So obviously the signal is not strong enough." WEll, you need a repeater (need a repeater). You can find firewire repeaters (firewire repeaters) to boost the signal across great distance
Kona 3 with apple precision codec soon??
by Tim Maloney 12 years ago
Hello all, Heading towards the purchase of a new video card and octo tower. Has the Kona 3 been around long enough for AJA to refresh the device allowing for support of the Apple precision HD codec on
Kona 3 with apple precision codec soon??
by Tim Maloney 12 years ago
Thanks Mike, Understand Pro Res422 supported in FCS2 but not hardware accelerated on the K3 like on the IOHD. Any inkling that Kona 3 will play out its model life unchanged or could anyone see a tweak
Terrain Maps/fly through
by Tim Maloney 13 years ago
Hello all, Need to do some set up sequences for a motor sports ( Rallying ) program where the client wants me to fly in from a view of Australia to the state then finally a view of the region where th
Terrain Maps/fly through
by Tim Maloney 13 years ago
Thanks Shane, Need maps based on Coolum in Queensland, Forster New South Wales, Melbourne Victoria, Busselton Western Australia, Canberra Australian Capitol Territory. Tununda South Australia. Need GI
FCP - EVS
by Tim Maloney 13 years ago
Hello all, I have a challenge coming up. Client wants me to do a timelapse of the set up and construction of the Superfighter Event down here in Melbourne Australia on December 2. I want to give to th
Re: FCP - EVS
by Trevor Asquerthian 13 years ago
Tom, Ben, How does the EVS file exchange with FCP work for you in the real world What length clips are you moving around Is it feasible to be editing 20 minute clips from multiple machines on the netw
Nuendo - FCP OMF
by Tim Maloney 13 years ago
Hello all, Understand Automatic Duck gives good OMF export results from FCP to Pro Tools Nuendo etc Any one with experience of using Automatic Duck to export from Nuendo to FCP using OMF. I see plenty
Re: Nuendo - FCP OMF
by Wes Plate 13 years ago
We've imported Nuendo OMFs into FCP using our Pro Import FCP plug-in. You can send me an OMF to test importing if you'd like. -- Wes Plate Automatic Duck
Varicam 72060P@25P shot at 60hz ingest to FCP over firewire?
by Tim Maloney 13 years ago
Hello, In the new FCP upgrade for the intel gear, has support for the above over firewire arrived for us long suffering PAL countries BEST
Integrating scoring data into FCP
by Tim Maloney 14 years ago
I have also posted this over on the FCP site. Hello All, We are in preparation for a Sporting Telecast in September here in Victoria Australia. We will be generating our own graphic backgrounds whilst
Panasonic Varicam flagged frames adoption by Avid?
by Tim Maloney 14 years ago
Hello all, As a Panasonic Varicam owner, I need to know what Avid products can operate using the flagged frames of over undercrank material generated by the camera. Preferably uncompressed. As Avid ow
Panasonic Varicam flagged frames adoption by Avid?
by Tim Maloney 14 years ago
Thanks Michael, Your response is more than I got any where here. I am unfamiliar with those product line. Do any of them see HDSDI Regards Tim
HDV 16:9 down conversion to SD 4:3 for broadcast
by Anthony Miles 14 years ago
Dear members, I am editing a TV spot in FCP 5 on a fast Dual G5, tiger and BM 5 drivers. I have 1080i HDV from Z1 in Native HDV 16:9. It works fine and I get RT down conversion with letter box on my S
HDV Broadcast?
by Tim Maloney 14 years ago
Good to see HDV displaying its broadcast capabilties so early on. Tim Maloney Varicam DP
© 2019 CreativeCOW.net All Rights Reserved
[TOP]