Ted Griffis: Activity About Liked Popular

Member Since:
August 29th 2006
111 Posts
100 posts
Location:
New York, NY
BUG: Modified audio channel settings disappear after re-link of media.
by Ted Griffis 4 years ago
Just submitted this bug report. Anyone encountering this issue Steps to Reproduce Bug: 1. Modify embedded audio channels on a QT Pro Res clip to be 6 channel mono instead of 8 channel mono by turning
AAF and OMF Export CS6
by Greg Jones 7 years ago
So I'm new to Premiere Pro, From Final Cut Pro and AVID. I did a small edit, which went fairly smooth. I've tried exporting an AAF for my audio guy and he cannot open it in ProTools. I thought I'd try
Re: AAF and OMF Export CS6
by Ted Griffis 7 years ago
Helping conform a feature doc and we've been having big problems getting a PPro5.0 project out as OMF in either 5, 5.5 or 6 for that matter. Anyone here have success exporting long form recently. We'v
HDPro 2 - Adding different drives
by Craig Harris 9 years ago
I have a 8TB HDPro 2 and want to bump it up to 16TB's with Hitachi 2TB drives. Does anyone know what the best drive options are for this and how difficult it is to add new drives and set up the Raid
Re: HDPro 2 - Adding different drives
by Bob Zelin 9 years ago
Hi Craig, I don't work for Cal Digit, so I can answer this question any way that I like. Cal Digit charges what they do for these drives because THEY WANT TO MAKE A LIVING. And guess what Craig - this
+1
Ted Griffis liked this 9 years ago
"Close Gap" Shortcut - FCP 7
by Terren LIn 10 years ago
Using the "close gap" shortcut, ( control-G ), I'm supposed to be able to close a gap anywhere on the timeline as long as my playhead is on the gap. This was the case w FCP 6 & now that I've upgraded
Re: "Close Gap" Shortcut - FCP 7
by Ted Griffis 9 years ago
Same issue as others, though this does not effect every project oddly. Beyond annoying! If you are a keyboard editor touching the mouse is not an option as it slows you down tremendously. A work aroun
+1
AJA iO HD > FCP > FW400 Drive?
by John Wise 10 years ago
Hi, all. I have searched the Cow but haven't found an answer to this question: Can I edit HD Prores on Dual 2.2 Macbook Pro (2GB ram) with an AJA iO HD unit connected to the Firewire 800 port and the
Data rate calculator
by Ted Griffis 10 years ago
For calculating storage needs, how many GBs you'll need, and determining aprox how many MB per second throughput you'll need out of your drive go here. Also, get the widget, a must have little tool. h
Live Capture Cabling: HVX to Kona3
by Ted Griffis 11 years ago
Hello all, Looking for some advice on cable length restrictions for the following setup. I'll be capturing from a HVX200 to a Kona 3. Cabling: HVX200 to AJAHD10A (or rented Colbalt box) connected via
Re: Live Capture Cabling: HVX to Kona3
by Ted Griffis 11 years ago
Thanks Jeremy!Ted Griffis GriffisART http: www.griffisart.com
White Sparkles with 8-bit Output
by Sean ONeil 11 years ago
Having a strange issue in Final Cut w the Kona 3. I'm seeing white sparkles in the video output whenever it's set to 8-bit. SD or HD. With 10-bit output, everything works fine.
Re: White Sparkles with 8-bit Output
by Ted Griffis 11 years ago
I had the latest AJA firmware and drivers with the seemly frame specific white "sparkles" or "white pixels". I just rolled back the Firmware as suggested by others here and we are looking good again.
Capturing 23.98 Varicam to 29.97 via 1400 deck?
by Ted Griffis 11 years ago
Hello all, Its been a while since I've had to do this but my recollection was, that with a Kona card I could capture material from a 1400 deck that was shot at 23.98 to a 29.97 psf timeline in FCP and
Re: Capturing 23.98 Varicam to 29.97 via 1400 deck?
by Ted Griffis 11 years ago
Thanks Jeremy, I'd like to cut in 23.98 for storage reasons but need to re-check my deliverables and see if that will fly, otherwise, 60 will be the answer. Thanks for the honest to goodness help. :-)
Capturing 23.98 Varicam to 29.97 via 1400 deck?
by Ted Griffis 11 years ago
Posted on Kona forum as well Hello all, Its been a while since I've had to do this but my recollection was, that with a Kona card I could capture material from a 1400 deck that was shot at 23.98 to a
P2 - HD Log vs. MXF4Mac - Reconnecting?
by Ted Griffis 11 years ago
Hello all, I've been looking into MXF4Mac and HDLog for an upcoming project, seen some tutorials, tried out some demos etc, and I like both apps. I do like the offloading ability that HDLog brings fro
Re: P2 - HD Log vs. MXF4Mac - Reconnecting?
by Ted Griffis 11 years ago
Absolutely makes sense, very cool and thanks for the clarification. Can anyone elaborate on how this might work with HD Log Thanks, TedTed Griffis GriffisART http: www.griffisart.com
Fall 2008 MacBook Pro's - DVCProHD and IoHD?
by Ted Griffis 11 years ago
Has anyone had any success with monitoring DVCProHD through the IoHD on the new MacBook Pro's Are these new laptops fast enough to handle this transcode on the fly Headed on set and we wont be capturi
Re: Fall 2008 MacBook Pro's - DVCProHD and IoHD?
by Ted Griffis 11 years ago
What speed MacBook Pro do you have now, or do you only have the new one Don't have a MBP yet, will purchase or rent. (I'd be more inclined to purchase if it had a matte screen :-)) With 720p 23.98, y
Compressor - gggrrrrr ...
by Sverker Hahn 11 years ago
Not a specific problem this time, just need to write down to see if others get angry over this program: - it is the most problematic of Apple s programs - it cannot sort a batch - new preferences do n
Re: Compressor - gggrrrrr ...
by Ted Griffis 11 years ago
Thanks, I'll check this out Ted Griffis GriffisART http: www.griffisart.com
Render trouble with Clone Stamp tool - Retouching
by Ted Griffis 11 years ago
I have a piece of footage, aprox 45sec that I'm retouching in AE8. The source is a fairly static shot that needed a lot of clean up on a wall using the Clone Stamp tool. The source material is Uncompr
Re: Render trouble with Clone Stamp tool - Retouching
by Ted Griffis 11 years ago
Well, if I turn off the Paint filter that has all of the clones, everything seems back up to speed. The only adjustments I have are Clones, any other suggestions for retouching out a bunch of dots off
Intensity HDMI Capture with HDV Deck Control?
by Ted Griffis 12 years ago
SORRY FOR CROSS POST ON FCP Hello all, Trying to bring in some HDV footage originally shot on the Canon XLH1 at the 24f setting. I have a Black Magic Intensity Pro a Canon HV20 (which supports the 24f
Re: Intensity HDMI Capture with HDV Deck Control?
by Ted Griffis 11 years ago
No, I never really got that to work, and went a different route, but a couple things to try and keep in mind. I haven't done this myself but I've heard some on the cow have been able to capture via th
32gig P2 cards: P2 Store and Leopard
by Ted Griffis 12 years ago
Is the P2 Store compatible with 32gig cards and OSX Leopard What do you need as far as firmware updates and software to get them working together Thanks for the insight. Ted
Re: 32gig P2 cards: P2 Store and Leopard
by Ted Griffis 12 years ago
Thanks Dave Yeah I know what you mean, completely obsolete in terms of storage, but still useful in the field at times as a loading device, which is what will happen on a number of upcoming shoots. Te
Canon HV20 capture on an Intensity Card using FCP 6
by Jeff Patrick 12 years ago
Has anyone had success in controlling the HV20 when connected to the Black Magic Intensity card (via HDMI) during Log Capture on FCP 6.0 FCP sees the footage but I can only capture now. Attaching the
Re: Canon HV20 capture on an Intensity Card using FCP 6
by Ted Griffis 12 years ago
Any progress on this I'm having the same issue and if there is in fact no solution, I'll need to return some equipment. Blackmagic's site says that deck control via Firewire is supported. FCP and PPRO
Intensity Pro stopped working in new MacPro
by Ted Griffis 12 years ago
Yesterday I installed a brand new Intensity Pro into a new 8 Core 2.8 MacPro (Early 2008) and everything was working. (except for the inability to monitor 720p 23.98 DVCProHD, which might get this car
Re: Intensity Pro card not recognizing in new MacPro
by Ted Griffis 12 years ago
Okay, well the problem is back. Today I booted up and again, the system is not seeing the Intensity Pro Card. (last time see above in thread, taking it out and re-installing the cardsolved the problem
Multibridge Pro - user experiences?
by Jason Porthouse 12 years ago
So I'm trying to decide whether or not the MBPro will fulfil my needs. It's a toss up between that or one of the AJA range - and I'm all too aware of the debate about customer service, product qualilt
Re: Multibridge Pro - user experiences?
by Ted Griffis 12 years ago
Hi, can you tell me if the Multibridge Pro handles SD 29.97 to HD 1080i 23.98 PsF conversion Also, is it capable of realtime HD-SDI Monitoring of 1080i 23.98 while simultaneously down converting to SD
60p or 30p out to D5 for Chroma Key and Compositing
by Ted Griffis 12 years ago
Okay, riddle me this. We have a green screen shoot coming up next week, shooting varicam and would like to go straight to D5, we have a D5 deck in house and this will help avoid a later 1700 deck rent
Re: 60p or 30p out to D5 for Chroma Key and Compositing
by Ted Griffis 12 years ago
Thanks for all your help, very helpful.
© 2019 CreativeCOW.net All Rights Reserved
[TOP]