Ruslan Akmanov: Activity About Liked
Ruslan Akmanov

Member Since:
October 29th 2005
101 Posts
100 posts
Location:
Azerbaijan
Kona 3 - 7.5.1 Driver issue?
by Jason Boucher 10 years ago
Hey Cows, I had a problem crop up today while editing in FCP 7.0.2 (updated last week). Basically, it would start to hang. I'd notice my external FSI monitor would freeze randomly and then playback in
Re: Kona 3 - 7.5.1 Driver issue?
by Ruslan Akmanov 10 years ago
I have issue with Dual Link output with 7.5.1 version& I wrote letter to AJA Support but don't have any answers for now. NAB still going . . . best regards ruslan_3d
Adobe Encode ERROR "Code" "6"
by Ruslan Akmanov 10 years ago
Hi to All. A little Help for peoples. Main reason for ERROR Code 6 is NAME OF THE DISK. Don't use SPACES in Disk Name or try to use ONE WORD. Or use underscore "_" (I don't check it for now) but hope
Re: Adobe Encode ERROR "Code" "6"
by Ruslan Akmanov 10 years ago
Next Adds Spaces work. MAIN problem is HOW MANY SYMBOLS are used in disk name. If You get this errors try to cut name of the disk to shorter one . . . best regards ruslan_3d
Cross Post: 444 in FCP is purple
by Aaron Neitz 11 years ago
Trying to digitize 444 RBG from HDCAM-SR. Final Cut is coming up with a picture - but it's washed purple. I've confirmed the 444 coming out of the deck is correct: plugged it into a dual-link 444 comp
Re: Cross Post: 444 in FCP is purple
by Ruslan Akmanov 11 years ago
Hi Aaron Where do You see purple picture On FCP Capture screen or on Connected to AJA control monitor best regards ruslan_3d
Best combo for Kona 3 + MacPro
by Juha Laaksometsa 11 years ago
Our company is going for a new editstation, along side 4 pc-based systems, we're up for the Mac-challenge next. Been so long in the pc-world and with such a small knowledge on Macs I thought to probe
Re: Best combo for Kona 3 + MacPro
by Ruslan Akmanov 11 years ago
Hi Juha It's hard to find ready system, but I have big experience with Mac Edit stations. I'm from Azerbaijan but I can try to help You via Internet. Write to my e-mail if You want and we will continu
RGB 4:4:4 ingest...turning into YUV in frambuffer???
by Marc Bostrom 12 years ago
Hi, We are trying to ingest from an Arri D-21 with dual-link 4:4:4 RGB 1920x1080 @ 25 frames pr second. Ingest app. is the AJA-vtr Xchange. ( Compression: AJA 10-bit RGB codec + Source 1080i25 10bit)
Re: RGB 4:4:4 ingest...turning into YUV in frambuffer???
by Ruslan Akmanov 12 years ago
Hi Marc VTR Exchange most work fine. Check AJA Pref Panel: Inputs must be "Dual Link". Then VTR Exchange: Compressor "AJA 10-bit RGB", Source "1080i25 10 bit" (1080p25 may be will work, but this is no
AES audio out for Mac sounds
by Aaron Neitz 12 years ago
Puzzle me this: Working at a unfamiliar facility. They have AES routed to the decks and the room - I can hear all my audio in Final Cut through the Kona AES outputs. But when I set the Mac to output t
+1
Ruslan Akmanov liked this 12 years ago
Re: AES audio out for Mac sounds
by Aaron Neitz 12 years ago
FWIW - the AES outputs are coming off BNC and not XLR. don't know if that is an issue
Kona 3 install with Huge Ciprico 5116
by Dalton Cox 12 years ago
I am trying to install the above however aja tells me that the Kona 3 is having issues in slots 3 and 4 and that they highly recommend slot 2 with the newer dual quad macs. My problem is that I bought
Re: Kona 3 install with Huge Ciprico 5116
by Ruslan Akmanov 12 years ago
My adds to Bob Zelin message. We used MacPro 2007 with AJA Kona 3 in slot 3 and Apple 4GB 4Channel or ATTO FC-44ES (less stable) in slot 4. Both lines in x4 mode. We got about 570MB s Write and 620MB
Drive Question?
by Mark Maness 12 years ago
Are there any COW users using a fibre channel card and eSATA cards in their FCP Kona systems We are in the need of some drive space and shared storage upgrades are way out of our current budget. Any s
Re: Drive Question?
by Ruslan Akmanov 12 years ago
Hi Wayne, We use Apple 4Gb 4 port Apple FC board and 2 Ciprico MediaVault 4210 units. All system work fine with about 600MB s Read Write. We had ATTO Cerenity FC44ES, but it have some troubles with 1s
2K DPX playback problem with Kona 3
by Arthur Puig 12 years ago
I'm playing real time 2K on a ref movie done with the AJA QT wrapper in FInal Cut, in the Viewer window, playing at 23.98 2048X1556, with the 2K crop to 1920X1080. It plays flawlessly for 52 seconds,
Re: 2K DPX playback problem with Kona 3
by Ruslan Akmanov 12 years ago
Hi Arthur, I had same problems with 2K playback on 10.5.2 system. Then I upgrade to 10.5.3 and all things fine. I can playback 2.5 minutes of 2K in 25fps7 May be You have problems due to You play vide
Kona 3 and uncompressed HD problems...
by Fredric Tirheden 12 years ago
A couple of months ago some friends of mine checked out the latest MacPro with best configuration you could get. Two 3.2GHz Quad-Core Intel Xeon (8-core) 16GB Ram Fibre channel raid card with external
Re: Kona 3 and uncompressed HD problems...
by Ruslan Akmanov 12 years ago
This is very strange situation. You need to know which of formats used for codecs. Final Cut Pro can't work in RealTime with 4:4:4 RGB format. Only 4:2:2 for now. We have very stable system with Kona3
PCI-E config on Intel Mac
by AccountNeedsRealnameUpdate 13 years ago
We've been having a terrible time getting an Intel Mac to see both tg=he decklink card and an ATTO fibre channel card, from the documentation (or an earlier post here) it seems like the decklink shoul
Re: PCI-E config on Intel Mac
by Ruslan Akmanov 13 years ago
Hi Luke and Glennser, About ATTOO FC Card. In my case it was exactly ATTO MacPro problem. This cadr work fine with Quard G5. May be it very old - about 2 years and have some hardware problems inside.
5.7.1 Drivers
by Pete Fausone 14 years ago
Installed 2 brand new FCP systems with G5 Quad's and Decklink Extreme HD's. I have all software up to date but have found an audio problem on both systems. When I first start the computer no audio wil
Re: 5.7.1 Drivers
by Ruslan Akmanov 14 years ago
Same strange sings here. Quard G5 Quadro FX4500 OS X 10.4.7 QT 7.1.3 Decklink 5.7.1 I send letter to Kristian Lam and we wait fixes too . . .
no video input on Decklink HD
by Daniel Weber 14 years ago
I have a Decklink HD card on my G5 2.3, PCI-X machine. I tried to capture some SD footage via SDI today, (I have been using the card mainly to monitor HDV footage and to do downconverts of HDV project
Re: no video input on Decklink HD
by Ruslan Akmanov 14 years ago
I have same problem on Multibridge (MB) if I connect Inputs from VTR to MB and Outputs from MB to VTR. May be You have same kind of connection If it so simply disconnect Decklink Outputs from VTR . .
MutiBridge 5.4.1 up
by Warren Eig 14 years ago
Just checked BlackMagic's Site. MutiBridge 5.4.1 up. Warren
Re: MutiBridge 5.4.1 up
by Ruslan Akmanov 14 years ago
Hi Kristian! I have e-mail contact with You about 2 weeks. I wrote to You that my RS422 began work . . . In other things 5.4.1 looks fine!
Multibridge 5.4 for Mac OS X and Windows XP
by Matt Dowling 14 years ago
Hi Everyone, Multibridge 5.4 for Mac OS X and Windows XP is now available from the BMD support page. New features include: -DVI-D scaling for the Apple 30
Driver 5.4 is more EVIL that I waited
by Ruslan Akmanov 14 years ago
Yesterday system worked OK with 5.2.3. I shotdiwn Mac and sleeped well. Today I turn ON our MAc and MB still don't OUTPUT (with old filmware and 5.2.3). This look like a Big Joke from BMD. Will try la
© 2020 CreativeCOW.net All Rights Reserved
[TOP]