Paolo Castellano: Activity About Liked Popular Images

Member Since:
December 5th 2010
191 Posts
100 posts
Location:
Rome, Italy
Friends:

Alessandro Cofanelli

Alex Gerulaitis
Why buy a BMPC today when the Ursa mini is the same price?
by Philippe Orlando 4 years ago
Am I the only one to think the Ursa Mini is making the BMPC 4K Irrelevant If you're going to stay with the 4K sensor, why not just by the Ursa Mini instead of the BMPC 4K Am I missing something here
Re: Why buy a BMPC today when the Ursa mini is the same price?
by Paolo Castellano 4 years ago
Hi Philippe, maybe because today the URSA Mini is not yet available, so if "TODAY" you need a cinema camera... Production 4K or URSA v.1.0 (or Arri Alexa) :-) Ciao, Paolo Paolo.Castellano@ivs.it www.i
JVC GY-LS300 Low Light test: 4K@25p
by Paolo Castellano 4 years ago
Hello JVC fans, if any of you would like to know if the LS300 is a good low light performer, here is a short test I made on a pre-production unit, with a cheap lens. The next day I had other lenses (C
Re: JVC GY-LS300 Low Light test: 4K@25p
by Paolo Castellano 4 years ago
Hi, A couple of weeks ago when I was making a demo of ivsEdits at the JVC booth in a trade show, the local representative of Atomos asked me to read some files recorded by the shogun and an LS300, bot
JVC GY HD250- Need a 1080p Hard disk or Solid State Recorder Solution
by Johnny Five 4 years ago
Hello All, We use three JVC GY HD250 cameras here on campus. Currently, I use the Focus Enhancements ProHd DR-HD100's when using them as a ENG setup without the studio and ccu attachments.. The best i
Re: JVC GY HD250- Need a 1080p Hard disk or Solid State Recorder Solution
by Paolo Castellano 4 years ago
Hi Johnny, camera bodies can't be upgraded to 4K. You would need new studio cameras. I think that JVC will realease new ones at the NAB. About the recorder, AJA KiPro are very expansive, for your need
Anyone had any experiencefor Axel You Play
by Ben Edwards 5 years ago
It is a TV station playout system which supports decklink cards. Was wondering if I could play through SDI and use a splitter to get audio out of HDMI. Ben -- Ben Edwards - Freelance Picture Editor ht
Re: Anyone had any experiencefor Axel You Play
by Paolo Castellano 5 years ago
Hi Neil, Axel Technology Youplay is a well designed contribution player designed to playback most kind of files with all the options that you may require. It exists in a free version but the professio
thank you for the IBC new product releases
by Bob Zelin 5 years ago
The multiviewer for $1495 ! the 4K HD Monitor for $1995 ! the 40x40 Videohub router for $1395 I am speechless. Bob Zelin Bob Zelin Rescue 1, Inc. bobzelin@icloud.com
+1
Jim Wiseman liked this 5 years ago
Re: thank you for the IBC new product releases
by Paolo Castellano 5 years ago
Hi Bob, wonderful prices but please note that the 40x40 Videohub router lists a little bit more, i.e. 2995.00USD (that is cheap too :-) https: www.blackmagicdesign.com products smartvideohub The multi
Question About Ultrastudio SDI---Again
by Bill Ravens 5 years ago
Hello, I'm using Ultrastudio SDI (USB3 on Mac v10.9.3). Using driver v9.7.9(Beta)which is over 1 year old. I have, previously, downloaded driver version 10.1.1, which does not work on the Mac(hardware
Re: Question About Ultrastudio SDI---Again
by Paolo Castellano 5 years ago
Hi Bill, I think that, now, Blackmagic doesn't support the Ultrastudio SDI on MAC. If you take a look at this page http: www.blackmagicdesign.com products ultrastudiousb3 techspecs you will see that t
Ultrastudio Pro not working on Mac
by KrickeT Ro 5 years ago
Hello, I am trying to use a Blackmagic Design UltraStudio Pro on a Mac and it is not working. I am using a UltraStudio Express on the new Mac Pro and it works like a charm, no headaches whatsoever. Tr
Re: Ultrastudio Pro not working on Mac
by Paolo Castellano 5 years ago
Hello, don't waste your time anymore, the Ultrastudio Pro is not supported on MAC OS. http: www.blackmagicdesign.com products ultrastudiousb3 techspecs Best Regards, Paolo.Castellano@ivs.it www.ivsEdi
Can anyone Recommend a Quicktime HD recorder?
by Steven Orsinelli 6 years ago
Hello guys, I bought the ATEM studio for my Film Broadcasting class, very happy with it. However I believe i made the mistake of buying the Panasonic AG-HMR10 Mini- HD AVHD recorder to record the outp
Re: Can anyone Recommend a Quicktime HD recorder?
by Paolo Castellano 6 years ago
Hello Steven, I use it on a PC, but yes, you can capture to the same Mac you are using to control the Atem TVS; you just have to plug both Ethernet and USB 2.0 cables between your MAC ATEM, and you ca
HDMI or SDI?
by John Mark 6 years ago
Whats better to output interlaced graphics A News Graphic Lover
Re: HDMI or SDI?
by Paolo Castellano 6 years ago
Hello John, if you are happy of the "HD results" of your current monitor, you could consider to add to your workflow a "VIDEO SCALER". It will transform your PAL source into the format that your monit
Any XH-A1 users here face this issue?
by Chas Smith 6 years ago
Finished an out-of-town shoot doing ENG style intvws, b-roll, etc. using my venerable Canon XH-A1. Shot 7 tapes...did spot checks on-site for audio, focus, etc. Everything looked and sounded good. Son
Re: Any XH-A1 users here face this issue?
by Paolo Castellano 6 years ago
Hello, in my experience the "play-freeze" problem happens at the beginning and at the end of the tape only. In the midde I never had problems; this is probably due to the different pressure of the tap
"Clicking" and "Popping" noise from DeckLink SDI Audio
by Daniel Skrobowski 6 years ago
Hello, I'm experiencing some very annoying audio quality issues while using my DeckLink SDI. Upon feed capture or preview, I can here a very annoying "popping" "clicking" "static" sound in the audio f
Re: "Clicking" and "Popping" noise from DeckLink SDI Audio
by Paolo Castellano 6 years ago
Hello Daniel, last driver builds introduced on my systems audio quality issues (P6T Deluxe and P9X79). Reverting back to archived builds (like 9.7 http: www.blackmagicdesign.com support detail registe
JVC GY-HM70 "Shoulder Camcorder", Extensive Test and Review
by Paolo Castellano 6 years ago
Hello Creative Cows, the JVC GY-HM70 is not yet in the shops, but I was lucky to get it for a day in the "Caput Mundi" and I'd like to share a test I made with it. I hadn't much time, but I tried to t
Re: JVC GY-HM70 "Shoulder Camcorder", Extensive Test and Review
by Paolo Castellano 6 years ago
Hello Leo, are you sure aren't you referring to the JVC Gy-HM150U http: pro.jvc.com prof attributes features.jsp If you are referring to it, they are totally different products. One is a shoulder came
Maintaining camcorder focus for dance recitals
by Keith Betts 6 years ago
I own the JVC GY-HM700 with a Fujinon lens and use Varizoom rear controls for focus and zoom. The problem I've encountered shooting dance recitals is maintaining focus. The problems arise from the fac
Re: Maintaining camcorder focus for dance recitals
by Paolo Castellano 6 years ago
Hi Keith, backfocusing is a "one time only" operation. Once made, it will stay correct for years. If your lens looses the backfocus during a single show, there must be a problem that requires service.
is it possible to capture hdv 1080i footage shot on a sony camcorder on JVC mini dv tape?
by Adriana Perez 6 years ago
Hello I shot hdv 1080i footage on a sony camcorder on a JVC mini dv tape. Now i am having problems capturing the footage. The first 10 minutes were fine but now everything is just blue. I have read th
Re: is it possible to capture hdv 1080i footage shot on a sony camcorder on JVC mini dv tape?
by Paolo Castellano 6 years ago
Hello Adriana, I hope that you already found a solution to your problem, but I can confirm that you can use a JVC DV Tape into a Sony HDV camcorder. The problem may be the same of recording HDV over S
Adobe CC and BM DeckLink 9.7.5
by James Orlowski 6 years ago
Just updated from CS6 to CC on my Windows 7 Pro DeckLink Studio workstation and all seems fine, except in AE CC, I no longer have an option to send my audio thru my BM speakers, only my Windows speake
Re: Adobe CC and BM DeckLink 9.7.5
by Michiel van Haren 6 years ago
Ok, I just managed to get something working! What I did was go to the "audio output mapping" screen in AE prefs. When this was set to System Default, the "left" and "right" twirl-down selection boxes
+1
Paolo Castellano liked this 6 years ago
Marianna Montague
by Chris Harlan 6 years ago
I feel a need to say this. When people are talking about a company's support, and who cares, and who doesn't, there is no better user advocate out there than Avid's Marianna Montague. Yup.
+1
Job ter Burg liked this 6 years ago
Re: Marianna Montague
by Marianna Montague 6 years ago
Ha check this out http: forums.creativecow.net readpost 334 6222 Marianna Marianna Montague marianna.montgue@avid.com 813-493-6800
+1
Paolo Castellano liked this 6 years ago
Bought 5.5 - 7.0 upgrade, can I download 6.5 as well?
by Toby Hinger 6 years ago
Hi everyone, I'm running MC 5.5 and have just paid for the 7.0 upgrade as the upgrade to 6.5 was no longer in the online store. I'm wary of upgrading to 7.0 straight away, and additionally my Mac Pro
Re: Bought 5.5 - 7.0 upgrade, can I download 6.5 as well?
by Paolo Castellano 6 years ago
Hi Toby, just to share what I'm experiencing now. I made the same thing, but installing both 6.5 and 7.0 on Windows, trying to register the software with the dongle, I get the message that my dongle (
AVID MC 7.0 Registration Issues
by Paolo Castellano 6 years ago
Hello, I've just installed my first MC 7.0, but running the Avid Licence Control, I get an error "There was an unspecified error (5) initializing the licencing engine". I tried to uninstall MC and to
Alessandro Cofanelli 6 years ago
Ciao Paolo, ti ricordi di me? ci siamo sentiti riguardo all'ivs capture.
Volevo chiederti una cosa: sai se un mac mini (facendo il botto in windows) supporta due blackmagic intensity shuttle usb3 insieme? Grazie
Alessandro Cofanelli 6 years ago
ps:hai un contatto skype
ivsEdits LE free NLE with Ultrastudio SDI I/O
by Stefano Romagnoli 6 years ago
I'm editing with success with ivsEdits LE a powerful free NLE. It is very easy to learn and to use. I hope it will be useful for someone to know it works with my Ultrastudio SDI finely. It is disappoi
+1
Paolo Castellano liked this 6 years ago
Repair XHA1 or Buy Another Cam?
by Seán Sutton 7 years ago
Hi, This is the situation. I have an XHA1 which is about 5 or so years old. Something happened and suddenly it won't work at all any longer. I've taken it to an authorised dealer and they say it will
Re: Repair XHA1 or Buy Another Cam?
by Paolo Castellano 7 years ago
Ciao Sean, I suggest to repair it, the camera has still a market, and its value (once repaired) exceedes a lot the repair price. Cheers, Paolo.Castellano@ivs.it www.ivsEdits.com ----------------------
Paolo Castellano 7 years ago
Ciao Alessandro,
sei più pratico di me con il Cow? Non capisco se c'è una chat integrata o meno.
Buon Anno,

Paolo
Alessandro Cofanelli 7 years ago
Ciao Paolo, anche io non sono molto pratico con il cow. Tempo f c'era un bottone chat, ma ora non lo ritrovo, quindi penso sia stato disabitato. Ti chiedo anche io una cosa: avevo letto in passato un [more]
Paolo Castellano 7 years ago
Ciao Alessandro, il link del software questo: http: www.ivs.it ENG_H 03prod 02ivs_e ivsCapture_e.htm abbiamo una versione demo con un limite di circa un minuto per i file catturati, per essendo tu in [more]
Alessandro Cofanelli 7 years ago
Ciao Paolo, facciamo cosi se sei d'accordo, quando avrai modo di andare dal cliente a montecastrilli fammi una chiamata, cos vediamo di organizzarci. Il mio numero 338.3264455. Ho letto la scheda tecn [more]
Paolo Castellano 7 years ago
Ciao Alessandro, il cliente a Montecastrilli non c' pi ; era la Crayons che prima stava ad Amelia. Comunque visto che avete due regie mobili vuol dire che come oni anche voi siete sempre in movimento [more]
On camera LED light advice
by Laura Weinstein 7 years ago
Hi all, I am looking to purchase a better on camera LED light then the one I have now which was $30. I am using it for weddings, predominately dancing at the receptions. There are so many out there I
Re: On camera LED light advice
by Paolo Castellano 7 years ago
Hi Laura, I used both the Manfrotto and the CN-160 and a lot of other ones. In my opinion, if you cannot afford the Litepanels "Sola ENG", the best option is the Swit S-2040. It really makes what its
Looking to upgrade my cameras
by Alex DeJesus 7 years ago
Currently shoot with Canon XHA1s (two of them) and seriously looking at the XF300 for my main camera. If I chose a DSLR or some other camera for B roll, what combinations would give me a reasonable co
Re: Looking to upgrade my cameras
by Paolo Castellano 7 years ago
Hi Alex, since you are using like me the XH-A1S, and your target are dark rooms, please take a look at this quick comparison between the XH-A1 and the GY-HM600 http: www.youtube.com watch v=WtTHuyJzRZ
JVC GY-HM600 Quick Test
by Paolo Castellano 7 years ago
Hello, I was searching for other tests tutorials of the new JVC camera into the forum, and it seems that nobody posted it here (if not the camera meno), so I hope you will enjoy my GY-HM600E quick tes
Re: JVC GY-HM600 Quick Test
by Roger Van Duyn 7 years ago
Thanks for the post. My pair of Canon's, and XH-A1 and an XH-A1S have served me well. And I really like their ergonomics. However, sooner or later I'll switch to something tapeless. The JVC is very en
Canon XH G1 Settings for Green Screen
by Denisse Monay 7 years ago
Salutations, Can anyone tell me what settings are best suited for the Canon XH G1 when it comes to shooting green screen Advice is much appreciated! -DM
Re: Canon XH G1 Settings for Green Screen
by Paolo Castellano 7 years ago
Hello Denisse, the BMD Hyperdeck Shuttle 2 has a slot for a common SATA SSD (no SSD is bundled with it); so the more SSDs you have, the more video you can store, without limits. On the HDR-55 web page
Does Datavideo DN-60 really only work with Sandisk Cards (whitch I am not impressed with)
by Ben Edwards 7 years ago
OK, I know the answer must be no unless Datavideo have been given a massive back hander and don't care about there customers so what speed cards which will work (there manual has a link to a list of o
Re: Does Datavideo DN-60 really only work with Sandisk Cards (whitch I am not impressed with)
by Paolo Castellano 7 years ago
Hello Ben, I'm happy that you shared your successful experience with other manufacturers. I don't work for Sandisk :-) , I just read the manuals of the equipments I use; you can check by yourself http
Video: Comparing the Cinema Camera and 5D Mk III
by Marco Solorio 7 years ago
Our latest video on comparing the Cinema Camera and the Canon 5D Mark III is finally up on Vimeo (took DAYS to finally get it up). Ultimately it's a little more compressed than we'd like, but it's bet
+1
Alex Gerulaitis liked this 7 years ago
Re: Video: Comparing the Cinema Camera and 5D Mk III
by Paolo Castellano 7 years ago
Hi Alex, my problem was that clicking on "Original .MP4 file (1920x1080 1GB)" I got a message "You are not allowed to download this file" (or this was the meaning), but I could download the other 2 on
+1
XH-A1 Starting to get tape-length dropouts.
by eric vinyard 7 years ago
I'm ready to put a bullet in my head over this. I'm seriously considering selling the camera and getting something that isn't tape-based, but I bought the XH-A1 for its manual controls and low-light c
Re: XH-A1 Starting to get tape-length dropouts.
by Paolo Castellano 7 years ago
Hello Eric, you're not the first one to get this problem... Many times the dirt is so resistent that the head cleaner tape is not enought for the job, and you may be compelled to send the camera to Ca
Which camera would be best for motion tracking?
by Jeremy Chopra 7 years ago
Hi all, Not sure which forum to put this question on as its quite a broad general question I guess.. I need to rent a camera and want to get the best one for motion tracking that will have minimal mot
Re: Which camera would be best for motion tracking?
by Paolo Castellano 7 years ago
Hi Jeremy, there are some CMOS cameras that are "rolling shutter" free, like Canon XF300 305 and C300 (and probably the new ones from JVC). I'd choose one of these new designs instead of an old (but s
WHAT is actually going on with Decklink/Premiere??
by Dan Turner 7 years ago
I've posted numerous times in both forums about different issues, been on the phone with BMD support, and email, and STILL over a year later do not have a workable system for these 2 products. Previou
+1
Paolo Castellano liked this 7 years ago
Re: WHAT is actually going on with Decklink/Premiere??
by Gerard Naziri 6 years ago
Chris' information about using his old multibridge extreme was what I searched for a long time. I having issues with my multibridge extreme since I switched from FCP to Premiere CS6. There is no playb
4 Channel Premiere cs6 timeline and the Intensity Extreme.
by peter pop 7 years ago
Hi folks, I'm using the Intensity Extreme (thunderbolt) device with PPCS6. I can monitor out fine with a standard 'Blackmagic' timeline preset, but if I modify the timeline preset upon setup to use mu
+1
Paolo Castellano liked this 7 years ago
Succes with Shuttle and Asus P67 chipset
by David Nelissen 7 years ago
Hello ! this message to indicate that I finally got success with my Intensity Shuttle and the new bios of my ASUS P8P67 Pro motherboard, running on 9.5.2 driver. Great ! David
+1
Paolo Castellano liked this 7 years ago
Re: Succes with Shuttle and Asus P67 chipset
by Paolo Castellano 7 years ago
:-) Thank you for sharing your success! I just installed a new BIOS on the P8H67-M EVO (of my home PC), maybe it will work for me too. Cheers, Paolo.Castellano@ivs.it www.ivsEdits.com ----------------
BR-D92U Can't Be Repaired--Need Rental or Dupe
by Geof Gilland 8 years ago
Hello, We received word from JVC Professional Repair that our BR-D92U can't be repaired. (It needs a replacement power supply that can't be located.) We need to transfer over 30 D9 tapes to hard drive
Re: BR-D92U Can't Be Repaired--Need Rental or Dupe
by Paolo Castellano 7 years ago
HI Geof, I think that any power supply can be repaired; don't stop finding a solution, I'm sure you will find many companies able to repair it. Best Regards, Paolo.Castellano@ivs.it www.ivsEdits.com -
Can I plug a headphone into my Canon rebel T3i?
by Gina Miller 8 years ago
Hello, I just got a Canon Rebel T3i and I want to do some headphone monitoring while recording, I don't see a jack for it on the camera. I really want to be able to check for audio problems in real ti
Re: Can I plug a headphone into my Canon rebel T3i?
by Vic Noseworthy 8 years ago
Hi Gina, I came across this YouTube video that explains how to achieve what you want to do (and, pretty inexpensively). I haven't tried it myself just yet, though, I'm thinking I will. You can order t
+1
Paolo Castellano liked this 8 years ago
Canon C300 review, and files to download
by Laco Gaal 8 years ago
Hi, I wrote an article about the C300, and also posted some original footage to play with. review: http: carousel.hu c300 files to download: http: carousel.hu c300 page_id=233 enjoy!
+1
Paolo Castellano liked this 8 years ago
Control two ATEM from a single computer?
by Richard Crowley 8 years ago
Can this be done I am proposing a configuration that uses two ATEM TVS switchers (one feeding into the next). Could I control both of them from a single computer I presume that I can set up the two sw
Re: Control two ATEM from a single computer?
by Jeff Hartman 8 years ago
I tried this very thing, and with the possible exception of Carlos' suggestion, the answer is no. With the Windows version, the problem is that the software stores the switcher's IP address in the reg
+1
Paolo Castellano liked this 8 years ago
Media Server Options
by Andrew Ryann 8 years ago
Sorry, this is a bit of a cross-post as I first posted it as a response in another thread: We have a MacPro and an iMac with the occasional MacBook Pro thrown into the mix. We primarily work in ProRes
Re: Media Server Options
by Paolo Castellano 8 years ago
Hello Andrew, have you tried to run the BMD disk test on both Macs at the same time However I'd be happy if you will share the result of the QNAP-ES4528V 10GbE setup (if you will get it). Cheers, Paol
audio issues with my decklink studio
by Pierre Paré-Blais 8 years ago
I'm having some peaking issues with the feed comming out of the analogue 1-2 outputs of my decklink. The signal comes peaking (clearly distorting) in areas where my source is clearly not peaking. The
Re: audio issues with my decklink studio
by Pierre Paré-Blais 8 years ago
Hi Paolo, Took me some time to reply, cause it turned out I didn't have any TRS- XLR adapter after all so I had to make some out of spare connectors I had in my scrap drawer... anyways... it works now
+1
Paolo Castellano liked this 8 years ago
Hyperdeck Shuttle 2 Firmware 2.0 Problems
by Bill Ravens 8 years ago
When I received my Hyperdeck Shuttle 2, I updated the firmware with Firmware v2.0 RC2 for win7. Files recorded to the Hyperdeck were readable by Media Composer v6. I just downloaded the v2.0 productio
Re: Hyperdeck Shuttle 2 Firmware 2.0 Problems
by Bill Ravens 8 years ago
update question: I did NOT install the Hyperdeck utility on my edit machine. Is it necessary to install this software for Avid Media Composer to be able to "read" the DNxHD files answer: (yep, I love
+1
Paolo Castellano liked this 8 years ago
Why is colored stage lighting creating blotches of color on my PMW-EX1? Is it like color-overexposure or something?
by David Bush 8 years ago
Yeah, she's not wearing purple facepaint that's the camera's interpretation of the some purple spot lights. Why is colored stage lighting creating blotches of color on my PMW-EX1 Is it like color-ove
Re: Why is colored stage lighting creating blotches of color on my PMW-EX1? Is it like color-overexposure or something?
by Paolo Castellano 8 years ago
David Bush "Are my CCDs messed up " Hello David, this a very interesting post; your camera features 3CMOS sensors instead of CCDs (used by high end Sony cameras). I saw very strange things captured b
OpenGear UpDownCross converter -- Closed Captions
by Jeff Hartman 8 years ago
Here's a question: we just received four of the OpenGear UpDownCross converters, and have discovered that captions pass properly in some combinations of input and output formats, but not all. Setting
Re: OpenGear UpDownCross converter -- Closed Captions
by Paul Provost 8 years ago
or you can just wait until BMD buys AJA and just trade it ; ) http: www.postandbeam.tv grade and finish @ post + beam http: www.facebook.com pages post-beam 137967176232067
+1
Paolo Castellano liked this 8 years ago
5D output
by Rich Rubasch 8 years ago
Does the Canon 5D HDMI output send a true 1080 stream We are looking into the Sound Devices Pix 240 but on all our HDMI 1080 monitors the HDMI output of the Canon 5D does not appear to be 1080... Is i
Re: 5D output
by Paolo Castellano 8 years ago
Hello, do you know if someone sells an hardware CF Media Player (with SDI or HDMI clean outputs) that supports files created with Canon 5D Mk2 and or Canon XF300 305 Best Regards, Paolo.Castellano@ivs
Business Apple Store and FCPX
by Gregorio Paolini 8 years ago
This morning I called the Business Apple Store from Italy (800 915 911), asking for an invoice with VAT when I was going to purchase a seat of FCPX from their App Store. Utterly surprised, the Busines
+1
Paolo Castellano liked this 8 years ago
Re: Business Apple Store and FCPX
by Matteo Duranti 8 years ago
a quick update: the VAT invoice I got is totally useless (and actually it makes no sense). In fact under the EU VAT law governing the sale of digital goods "a business must alway charge VAT to non-VAT
Playback Issues Deck Link Studio 2
by Robert Thalheim 8 years ago
Hello "Creative Cows", I have a Deck Link Studio 2. I work with Premiere Pro and After Effects CS5.5. My problems are: I get dropped frames on every cut within the timeline. But only when using avchd
+1
Robert Thalheim liked this 8 years ago
Re: Playback Issues Deck Link Studio 2
by Robert Thalheim 8 years ago
There are no problems with normal settings. When i copy the content of a sequence in to a non BMD sequenze (standard premiere presets) its all perfect! I wrote my situation also to BMD support, they m
+1
Paolo Castellano liked this 8 years ago
What RAID controller to choose
by Mike Nicolau 9 years ago
Hello all, Ihave a computer with 4 HDDs connected in RAID 10 with the help of the integrated mainboard controller. Unfortunately this controller is pure crap since i've aready had multiple failures in
Re: What RAID controller to choose
by Paolo Castellano 9 years ago
Hello, in my opinion the best Host Bus Adapters are from 3ware (now an LSI brand), Promise and Areca. The Arecas often use a fan on the heatsink (that means noise and or one more thing that can fail),
© 2019 CreativeCOW.net All Rights Reserved
[TOP]