Justin Toney: Activity About Liked Images
Justin Toney

Member Since:
January 27th 2007
56 Posts
Buzz/Hum in audio lines from computer connected to HDMI television
by Justin Toney 4 days ago
In this setup I have a laptop sending video to some televisions with no audio through that. The audio comes out of the 1 8" connection on the laptop and is sent directly to the sound console. When the
Re: Buzz/Hum in audio lines from computer connected to HDMI television
by Justin Toney 3 days ago
Removing power did not make the situation better or worse, like I had imagined.
Cleaning up a washed out video (from bright back lighting)
by Justin Toney 4 days ago
I was forced to film an interview over a bright backdrop, inside a building. The subject was in an office and his window was behind him. Of course we tried everything to get out of that area but there
Re: Cleaning up a washed out video (from bright back lighting)
by Justin Toney 3 days ago
Its the fact that the window lighting is so bad, and I knew this when I set up the shot. The blinds on the window don't work and I didn't know till it was time to film and by then it was too late. I g
Sending remote video via RTP UDP and needing FEC
by Justin Toney 4 days ago
I've got to send video from one studio to another via RTP and an IP Address. Everything I have found provides no error correction. We are using a DTE-3100 - DekTec device at the other studio to receiv
Clearcom or other intercom questions
by Justin Toney 3 weeks ago
I own several Clear Com and equivalent intercom beltpacks but I don't own a main or base station for all of those to tie into. My question is that I need to do an event and I need to get these headset
Re: Clearcom or other intercom questions
by Bouke Vahl 3 weeks ago
You don't need a base unit, you need a power supply only. Then you can daisy chain run parallel. hth Bouke www.videotoolshed.com
+1
Justin Toney liked this 2 weeks ago
ATEM Switchers and media players
by Justin Toney 3 weeks ago
Hi, I have a live event coming up soon and I'm looking for an expensive means to play packaged videos. For example lets says I'm doing a News show and I am having the anchor toss to a news package. I
Re: ATEM Switchers and media players
by Justin Toney 2 weeks ago
I have casper installed. Never could figure out exactly how to do this software properly. VMIX is an option as well but the support was horrible. I know with Caspar I needed an external card like a de
Live projection: how to remove onscreen data?
by Grant Harding 2 months ago
I'm going to be doing some live puppetry visuals during a friend's concert. So I want to connect a camera to a projector so I can project live video onto a screen in real time. Seems simple, right Wel
Re: Live projection: how to remove onscreen data?
by Justin Toney 3 weeks ago
Maybe try Magic Lantern if its available. I did that for my T3i to enable to same thing.
Sennheiser ew100 g3 with bad background noise
by Justin Toney 1 year ago
I'm having an issue I can't resolve. I have 3 Sennheiser ew100 g3 eng sets all using the lavalier mics. What's happening is that 1 of these picks up way too much background noise while the other 2 iso
Re: Sennheiser ew100 g3 with bad background noise
by Justin Toney 1 year ago
The first thing I tried was changing components but that doesn't change anything.
Animating a Still Image
by Justin Toney 3 years ago
I'm hoping someone can tell me the technical name for this. Lets say I have a still image and I want to animate a zoom and rotate so that it doesn't just look plain. What is this called
Re: Animating a Still Image
by Shane Ross 3 years ago
Yes...this requires using photoshop and After Effects. Photoshop to create the different layers, and After Effects to animate them. That video should explain it. Shane Little Frog Post Read my blog, L
+1
Justin Toney liked this 3 years ago
Getting the correct audio level
by Justin Toney 3 years ago
Forgive me on this, I see a lot of articles explaining what dBFS is and LKFS and so on but I never see where to set the final mix values to be compliant in my Premiere application. I have the Loudness
Re: Getting the correct audio level
by Peter Groom 3 years ago
Ok - you cant have a value to hit on a NLE meter that gives compliance to a loudness delivery value. The 2 are completely different things. The loudness algorithm is designed to meter based on program
59.94 or 29.97 for Broadcast Stations
by Justin Toney 3 years ago
Please pardon my ignorance on this one. Recently we upgraded from the analog SD world with a resolution of just 720x480 29.97. Now we are at a point where production needs to be 1280x720 59.94 Progres
Re: 59.94 or 29.97 for Broadcast Stations
by Justin Toney 3 years ago
Which is why if I'm working in a 1280x720 59.94p project with 720x480 29.97 clips then I need to know what is the best practice.
Filming in HD downconverted to SD or just film in SD????
by Justin Toney 5 years ago
I am trying to settle a debate we have in the office concerning some footage. This is a broadcast station with video airing at 4x3 SD NTSC. We do, however, have HD cameras that can shoot in both HD an
Re: Filming in HD downconverted to SD or just film in SD????
by Justin Toney 5 years ago
So lets summarize. From what I see you can oversample you anti-aliasing causing the edges to be too sharp for an SD image that is unable to handle all the information of HD. Am I correct in this assum
Premiere stops playing (in program and preview)
by Justin Toney 5 years ago
This is getting to be annoying on a daily basis. I have Premiere CS 5.5 with all the updates possible. Every few minutes, I find that Premiere will stop updating the video windows and refuses to play
Converting line level to mic level
by Justin Toney 5 years ago
Hi, I have a CANON XH-A1 camera which I am using for shooting football. I'm being sent a line level signal from the radio booth. At the same time, I also have a phantom powered crowd microphone that I
Re: Converting line level to mic level
by Justin Toney 5 years ago
Yea I got an adapter from B&H. Is there a diagram on how to build my own I would like to make a few of these.
Applying effects to multiple clips on a track (Media Composer 6)
by Justin Toney 6 years ago
Hello, I have also posted this on the Avid website. Here is my issue. I have a project in SD 4x3. All cameras except for 1 was shot in this format. The other was SD 16x9. The clip was ingested via tap
Re: Applying effects to multiple clips on a track (Media Composer 6)
by Jeff Greenberg 6 years ago
I'm a little unclear on what you're asking. I think you're asking this: How can I nest two effects on multiple clips (first a CC, then a resize) The problem is, to add a second effect requires autones
Avid Xpress Pro 5.2 Import Problems
by Justin Toney 8 years ago
I can't seem to post this on the Avid Forums so I am asking here. I have a show that I recorded on a DataVideo Hard Disc Recorder in .dv format. The file is split over multiple files names video1.dv v
Re: Avid Xpress Pro 5.2 Import Problems
by Justin Toney 8 years ago
But wouldn't that be double the work My other problem is that there are multiple cuts that I am making in this video so that brings a whole other world of problems with audio sync and so forth.
Keying Problems/Help
by Justin Toney 10 years ago
Before I begin, please use this image as a reference... I am having a terrible time with a key in After Effects. For this project I am using Primatte Keyer which is doing somewhat of a good job. I hav
Re: Keying Problems/Help
by Justin Toney 10 years ago
Its all coming together nicely, but if I choke the comp too much I start losing more good stuff so I guess I will need to find a happy medium between "waves" and surface area. I still have some blue s
Tutorial Help
by Justin Toney 10 years ago
I am in search of a tutorial on creating a transporter like effect as seen in Star Trek the Next Generation. I know what you are thinking, there are tutorials on this elsewhere. However, the only tut
Re: Tutorial Help
by Justin Toney 10 years ago
Thanks... I have a new question. How in the world do I make one of these use an alpha channel so I can import into another program Seems every time I export I either get black boxes around the particl
Few Questions
by Justin Toney 11 years ago
I am editing a rather large project in Premiere Pro 2 and I am running into some problems. This is the first time I have tried to color correct anything and I am in need of a good tutorial on this. Ev
Re: Few Questions
by Justin Toney 11 years ago
Thanks... however, I was looking for something online that I could look at. I pretty much cant afford to buy anything right now.
© 2017 CreativeCOW.net All Rights Reserved
[TOP]