John Williams: Activity About Popular
John Williams

Member Since:
October 1st 2011
15 Posts
ATEM 1 Switcher
by Robert Foote 6 years ago
Can anyone help me out I am configuring church setup on a tight budget but have utilized an ATEM 1 Switcher and need to do a few things with it. 1. Record 4 camera input from SDI (no problem here) 2.
Re: ATEM 1 Switcher
by John Williams 6 years ago
You can run them both, but I have found in the past that the ATEM is VERY particular about an HDMI input from a computer. All the paramiters have to be correct. Therefore, if it doesn't work, then loo
+1
ATEM 1 No timecode on SDI feeds
by John Williams 7 years ago
Has anybody had a problem with putting timecode on the SDI Feeds We use an external generator, and it's worked fine but we think that one of the new firmware upgrades has stopped embedding timecode on
Re: ATEM 1 No timecode on SDI feeds
by Shaun Roemich 7 years ago
Slightly off topic but as I'm looking to ADD timecode to my system, what generator are you using Big Dog - Technical Director - Switcher Road Dog Media - Vancouver, BC Canada roaddogmedia@gmail.com
ATEM Audio/Video Delays
by Ronak Desai 8 years ago
Just to be safe I wanted to find a solution for delaying audio in case the ATEM has 2-3 frames (give or take) of delay. I found the Behringer FBQ100 but the only concern I have with it is that it only
Re: ATEM Audio/Video Delays
by John Williams 8 years ago
If you run a Genlock signal feed to the ATEM and your cameras you will improve the situation as well. Our unit is now at 0 frames delay in HD and 1 frame delay on conversion to HD Component. Even a st
Computer input to ATEM1 Switcher
by John Williams 8 years ago
I need to input an SVGA computer signal into the HDMI inputs of the ATEM 1 Has anbody tried this, and what converters work John Williams U.K.
Re: Computer input to ATEM1 Switcher
by John Williams 8 years ago
Hi, No its not a problem because the unit that I use converts the SVGA into an HDMI signal either at 1080 or 720 or an sd signal. As long as you make sure that the scaler is set to the correct resolut
ATEM 2.6 Update
by Ronak Desai 8 years ago
I've been anxiously waiting for the USB 3.0 update (Version 2.6) for the ATEM Production Switchers. Does anyone know if the output on the USB will work with Adobe Flash Media Live Encoder I currently
Re: ATEM 2.6 Update
by John Williams 8 years ago
I have just installed the 2.6 update and can't get either Media Express or Ultrascope to work. The upgrade all went OK and the software installed to the main unit OK. I have checked the NEC Chip softw
USB 3 on ATEM1 switcher
by John Williams 8 years ago
Can anybody tell me if USB3 is now enabled on the ATEM switcher I am running the new software 2.5 John Williams U.K.
Re: USB 3 on ATEM1 switcher
by John Williams 8 years ago
Thanks very much indeed for this. I have to say that your product is exceptional in it's quality and price. Well done.
© 2019 CreativeCOW.net All Rights Reserved
[TOP]