Dave Neyman: Activity About
Dave Neyman

Member Since:
March 28th 2007
136 Posts
100 posts
Location:
Utah
Offloading in the field
by Tom Prigge 8 years ago
This is a long post, but I hope you'll slog through it. First, thanks for the comments about my nonworking tape transport in my HVX200A. I can offload my cards at night onto an external drive using a
Re: Offloading in the field
by Dave Neyman 8 years ago
I think you should add one additional step. The external drive you offload to should be a raid 1 setup. That way you have some redundancy if one drive goes bad. If your external drive were to go bad y
middle east travel
by Trevor Ward 8 years ago
I might be traveling to the middle east this year and wanted to get advice on VISA's. Each country is different. But the two I plan on traveling to have either a tourist VISA or a business VISA. I'll
Re: middle east travel
by Dave Neyman 8 years ago
Jeremy outlined it very well. I've worked in the middle east and it is a pain. My philosophy for all locations is pretty simple. If I can afford to have my filming be shut down (or worse) and get kick
HVX 200 Repair
by Sam Pope 9 years ago
Anyone have any recommendations for a reputable place to send my HVX to get repaired Thanks.
Re: HVX 200 Repair
by Dave Neyman 9 years ago
The Video Clinic in Santa Monica
Set up time lapse on Panasonic AG-HVX200
by Thomas Mazzarella 9 years ago
I have a Panasonic AG-HVX200 and looking to record a time lapse sequence. Can anyone tell me what settings I should turn on in the camera Thomas Mazzarella
Re: Set up time lapse on Panasonic AG-HVX200
by Dave Neyman 9 years ago
You got me. I'm not sure why yours is not working. Mine works fine. My menus is as follows: Rec Format 480i Record Mode Rec Function One Shot Time Interval Time Etc. The menu selection you want is INT
P2 Location Capture
by joe perri 9 years ago
Hello, I'm fairly new to the P2 workflow so im learning as i go. Heres my situation, I'm sending my 2 partners out to Kentucky for a shoot. They will be supplied with an hvx-200 (plus necessary access
Re: P2 Location Capture
by Dave Neyman 9 years ago
I have to chime in on this one. I am in full agreement with Steve. Too many people think they can just figure it out as they go. They assume that since the cost of the gear is minimal it must be as ea
HVX200 Transfer times very slow
by Ari Grunzeweig 10 years ago
Hi, 1. I've done a number of test transferring clips from my hvx200 via firewire to final cut using log and transfer. Using different formats, (720-30pn, 720p30, 720p60, etc...) all transferred slowly
Re: HVX200 Transfer times very slow
by Dave Neyman 10 years ago
It should be much faster than that with a Duel Adapter but be aware that you have to reboot each time you plug it in and it can be quirky. I am experiencing about 12-14 minutes for a 16 GB card. Be su
P2/ Mac Workflow Questions
by Kyle Benjamin 10 years ago
We've got a project coming up in a few weeks and are scrambling to make sure we have the proper gear and workflow in place before we head to south Florida. There are some set in stone requirements tha
Re: P2/ Mac Workflow Questions
by Dave Neyman 10 years ago
A couple of rules I live by with this workflow. Be sure that the hard drive that you transfer the P2 cards to is set up as a Raid 1 or "Mirrored" Raid. You can also copy the data to 2 different drive
New P2 cards work with older HVX200?
by Rory MacNish 10 years ago
I'm looking to buy more P2 cards for my HVX200. I have 3 4gig cards and they work great. I want to buy larger cards, 32gig or 64gig cards. Will they work on my older HVX200 And, What is the process to
Re: New P2 cards work with older HVX200?
by Dave Neyman 10 years ago
Old cards will work fine. I just did the firmware upgrade because I bought 2 new 32 GB cards. Evrything works flawlessly. As previously stated, follow the instructions to a T.
Recovering Data from formatted drive
by john murphy 10 years ago
I accidentally formatted my gtech 1 terabyte drive. I used the Mac utility and selected 1 partition. I'm using tiger on a G5. Can anyone who has successfully recovered data please advise me on a data
Re: Recovering Data from formatted drive
by Dave Neyman 10 years ago
You might try Data Rescue II for Mac. I did the same thing and recovered all the data with great success. All the files were renamed but I was grateful I got them back. DO NOT write anything on your d
© 2019 CreativeCOW.net All Rights Reserved
[TOP]