Chuck Pullen: Activity About Popular
Chuck Pullen

Member Since:
August 1st 2008
343 Posts
100 posts
panasonic AVHS400A switchs are moved by one
by Enrique Solis 5 years ago
Hello everyone ! hope you guys can help me the problem u have is that in my preview monitor when i need to select input 1 i have to press channel 2... what could i do to fix this
Re: panasonic AVHS400A switchs are moved by one
by Chuck Pullen 5 years ago
Sounds like the routing is messed up. You will need to go into the setup menu and route source 1 to input 1, and so fourth. Chuck
Stream breaks up when switching from still to live image
by Chuck Pullen 5 years ago
I had an event last night where we pulled all of the PowerPoint slides in to Wirecast and were switching back and forth between the stills and a live camera fed to Wirecast over SDI via a DeckLink Ext
Re: Stream breaks up when switching from still to live image
by Chuck Pullen 5 years ago
Craig Seeman "Packet loss can be a problem. Always should be 0%" How do I check for that Craig Seeman "What was new, the slides Size and source codec might have been the problem impacting the transit
Best way to use Wireacst with New Livestream
by Chuck Pullen 5 years ago
I was absolutely floored when I learned that the only way to use new Livestream is by using their equipment, and you "cannot" use Wirecast. I am wondering what the ideal work around for this would be
Re: Best way to use Wireacst with New Livestream
by Chuck Pullen 5 years ago
Craig Seeman "I'm just plan not happy with New Livestream." Amen to that brother!!! I have gone to bat for Wirecast several times with Livestream sales now, and I have flat out told them that I will
Confusion About Video Cards
by Chuck Pullen 6 years ago
I'm looking into upgrading to version 5, and was thinking of buying a "Turn-Key" system. I am confused as to why in the specs Telestream would say that NVIDIA cards "Aren't recommended" yet in the spe
Re: Confusion About Video Cards
by Craig Seeman 6 years ago
Some, not all, nVidia cards don't handle the YUV GPU Preference setting well in Wirecast. The turnkey systems have been vetted by the builders I'd suspect. Basically they'd test to see if there's a ne
Accidentally Recorded Flash to Disk, How Do I Create A Useable File?
by Chuck Pullen 6 years ago
I normally record a copy of my stream to disk as a Windows Media File, but somehow recorded as a flash file. Any thoughts on how to turn this into a usable video file What is the purpose of recording
RE: Real guns on location
by Sam Lesante Jr. 6 years ago
Does anyone know what the laws are with having real guns at a shoot We are going to be in a wooded area doing a show and two of the guys said they have permits to carry and conceal. Are they legally a
Re: RE: Real guns on location
by Chuck Pullen 6 years ago
It s safe to assume they will go rogue and even if you are 100% sure they are unarmed, your Bigfoot may get a beating or worse from this group of I can only assume experienced hunters. It s a funny co
Ki Pro Corrupt File
by Ryan McAfee 6 years ago
This is now a second time we have had this issue. We have the Ki Pro Mounted as the primary record deck in a mobile production trailer. When we bring the footage back from the trailer the footage is c
Re: Ki Pro Corrupt File
by Chuck Pullen 6 years ago
Hmmm... Sorry sounds like you have a bigger issue then. Maybe the drive wasn't seated or something along those lines Gary would be the one to figure this one out. Chuck
Lost P2 functionality with build 563
by Chuck Pullen 6 years ago
Has anyone else lost complete P2 functionality with the new build 563 (Not that it worked very well before) I e-mailed support explaining the issue and asking about getting the link to build 394 They
Re: Lost P2 functionality with build 563
by Chuck Pullen 6 years ago
Thanks Mike! That was the link I was looking for... Chuck Pullen
Craig, Error Connecting to YouTube?
by Chuck Pullen 6 years ago
Hey Craig, I am getting an error when trying to link to a YouTube account to stream to a Google+ Hangout. Usually I am getting HTTP Error 401, but sometimes it is an Error 1. I am logged into the acco
Re: Craig, Error Connecting to YouTube?
by Chuck Pullen 6 years ago
AH-HA (Lightbulb goes off) So we aren't going YouTube to Hangout, it is Hangout to YouTube using Wirecast and Virtual Camera... Oh thank you Wise, Wirecast Guru! Chuck
News: Hybrid’s New Sport Track Technology Enables Robotic Cameras To Automatically Follow Live Sports Action
by Cow News Droid 6 years ago
Using Robotic Camera Operators Cuts Live Sports Production Costs (Montrouge, France--May 29, 2013) Hybrid, a leading provider of real-time graphics and robotic camera systems, has developed Sport Trac
Re: News: Hybrid’s New Sport Track Technology Enables Robotic Cameras To Automatically Follow Live Sports Action
by Chuck Pullen 6 years ago
They won't be happy until they have eliminated everyone that works in television production will they Chuck Pullen
Dodgey way to switch HD SDI
by Craig Ricker 6 years ago
Ok so just wanted to know if you can simply switch between 2 HD SDI feeds down into 1 HD SDI feed through a composite BNC switch. As far as I can tell they both use 75 Ohm cables and connectors. I tri
Re: Dodgey way to switch HD SDI
by Chuck Pullen 6 years ago
Most devices can't handle the bandwidth (or is it the frequency ) of HD video. If it's working (It shouldn't though) then you're good. I wouldn t think you are doing any damage though. Chuck
Creating/sending custom lower thirds during live stream event
by James Sapione 6 years ago
What program to create lower thirds for live streaming multicam event Hello I'm directing multi camera live streaming events. I want to add lowerthirds(15of them) in during the event. We have a Panaso
Re: Creating/sending custom lower thirds during live stream event
by Chuck Pullen 6 years ago
I ve always used Wirecast, and have migrated away from Livestream because of all of the limitations. CasparCG might work for you Chuck
RTMP to SDI
by Ievgenii Larin 6 years ago
Hi guys. Maybe it is silly question, but is there any real way to capture RTMP-stream and output it to SDI Here is my situation. We are specialized in producing local sports for web-streaming. Occasio
Re: RTMP to SDI
by Chuck Pullen 6 years ago
Check out these guys, I am looking for a similar solution and these guys may have it. http: www.multidyne.com Chuck
Sony looking to get feedback, reposted from Facebook
by Mark Barton 7 years ago
Sony Software Here's a message from Sony Creative Software Engineering: Have you ever wanted to speak to someone behind the applications you use Well now's your chance. We are interested in talking to
Re: Sony looking to get feedback, reposted from Facebook
by Chuck Pullen 7 years ago
Thanks for the link, I submitted my information, but have little hope of being picked as I don't think they are looking for my brutally critical honesty about the last couple of versions of SVP. Chuck
Agree to EULA everytime I use SVP12?
by Chuck Pullen 7 years ago
As part of a long list of simply baffling issues I have had with SVP for the past 4 or 5 versions or so, now after a fresh install for SVP12, I have to click on the EULA agreement every time I open SV
Re: Agree to EULA everytime I use SVP12?
by John Rofrano 7 years ago
Yea, as Steve said this is not normal. Is your Windows account an administrator If not, you might want to start Vegas "as administrator" just once and see if that gets the EULA out of the way. jr www.
+1
Online TV channel, what services are there?
by Enea Tanku 7 years ago
I want to find a service that allows me to run an online tv channel. We have all the shows ready and all the indents are finalized but we are finding it hard to find something that will allow us to ru
Re: Online TV channel, what services are there?
by Chuck Pullen 7 years ago
There is a forum here under Telestream Wirecast, and also on the Telestream site. The automation program is being written by a third-party individual, but it sounds promising. Chuck
Black Frames after Update
by Chuck Pullen 7 years ago
I updated my Ki-Pro with the new firmware about a week after it came out and it seems to have developed an issue. I am seeing a dropout of several seconds of black on at least two different outputs ev
Re: Black Frames after Update
by AJA Sales Department 7 years ago
Please feel free to contact AJA Technical Support via phone or email to review your Ki Pro configuration. You may reach AJA Technical Support via phone or email, Monday through Friday, between 9am and
Church streaming/recording setup review
by Chris Reif 7 years ago
I'm supposed to be the video guy at my small church. We'd like to start streaming recording services and sending the A V signal from the sanctuary to 2-3 adjacent rooms. I'd like to run through the se
Re: Church streaming/recording setup review
by Chuck Pullen 7 years ago
Hey Chris, I work for a company that is a few weeks away from expanding our streaming site to specifically provide streaming and support for churches, If you would like more information, send me an E-
Broadcast Enginering Education
by Mark Dershowitz 7 years ago
Hello Everyone Thanks in advance. Im currently Working as an Assistant Editor at a Broadcast company. Im hoping to change roles and become a Engineer, I have a technical background, but not in Broadca
Re: Broadcast Enginering Education
by Chuck Pullen 7 years ago
The Cleveland Institute offers a Broadcast Engineering correspondence course that may offer what you re looking for. It s quite intensive, covering many topics that affect a broadcast engineer. Chuck
Interface the ATEM Camera Converter to an RTS System
by Chuck Pullen 7 years ago
I am thinking of using the ATEM Camera Converter for one or two cameras in my live productions. The only hitch (Besides not having Genlock) that I am seeing, is using this with my existing RTS wired i
Re: Interface the ATEM Camera Converter to an RTS System
by Chuck Pullen 7 years ago
Thanks guys, those are exactly the kind of solutions I am looking for! Chuck
Which version of Vegas Pro is the most stable?
by Bob Mark 7 years ago
I'm looking to upgrade from V.8 and had seen some negative posts about later versions. Which version seems the most stable Thanks. Bob
Re: Which version of Vegas Pro is the most stable?
by Chuck Pullen 7 years ago
The version that comes from Adobe! HA! Chuck
Multi-Cam Live Stream
by Miguel Sierra 7 years ago
what would be the cheapest and most effective way to have a 7 camera operation. That is recorded and streamed HD live to the web This is what we considered seven HV40s linked to a MacPro running Wirec
Re: Multi-Cam Live Stream
by Chuck Pullen 7 years ago
Cross-post this in the Wirecast forum and ask Craig for his advice, he is the MAN when it comes to Wirecast! Chuck
KiPro as slow motion playback for on set preview
by Matthias Stöckl 7 years ago
Hello guys! I wonder if I can use the KiPro as a playback device for slow motion preview with a controller connected via RS 422. Could this bring a decent slow motion effect Is the controller the esse
Re: KiPro as slow motion playback for on set preview
by Chuck Pullen 7 years ago
We had this conversation about a year ago when RS-422 support was available with the new firmware. I think the verdict was that it was very possible, I just haven t gotten around to finding an inexpen
Blu Ray/DVD/HDD Recorder
by Tony Esposito 7 years ago
Anyone know any of the Blu Ray DVD Hard Drive Recorders that you can record to the hard drive and a DVD at the same time Currently I record to DVD then use Pinnacle Movie Box to capture to a hard driv
Re: Blu Ray/DVD/HDD Recorder
by Chuck Pullen 7 years ago
We are ALL waiting for that Tony. NAB is right around the corner, maybe someone will unveil something. TASCAM came out with something similar last year with about a $2k price tag. http: tascam.com pro
Audio always starts at the begining
by Chuck Pullen 8 years ago
So as we all know Vegas 10 is the biggest disappointing disaster since...well version 9... Anyway I found yet another issue among the many hundreds I have had and subsequently reported with this progr
Re: Audio always starts at the begining
by Chuck Pullen 7 years ago
Oh yes I did find a solution...It's called ADOBE PREMIERE! I Literally now have to take all of these different files that I am working with when doing multi-camera shoots, put them all into Premiere a
Sony Vegas 11 Crashes while rendering
by Dan Yanek 7 years ago
Hello guys, I'm new to the site, but must say thank you! Many times my research has brought me here, and its almost always useful! Now to my problem. I am running Sony Vegas Pro 11. I am using data re
Re: Sony Vegas 11 Crashes while rendering
by Chuck Pullen 7 years ago
Welcome to the site...Don t feel bad, Vegas crashes no matter what settings you use! Chuck
Pro 11...S.N.A.F.U. at Sony...My Epic Adventure!
by Chuck Pullen 7 years ago
Well after enough liquid courage (I.E. Bombay Gin) I decided to give Pro 11 a spin. I first did a fresh Win 7 64-bit install and made sure everything is completely up to date. Got Vegas installed and
Re: Pro 11...S.N.A.F.U. at Sony...My Epic Adventure!
by Chuck Pullen 7 years ago
Can you just imagine for a second if versions of Windows operated like Vegas I just purchased Win 7 64-bit, and it works great, but crashes every time I go on the internet, so I have to use 32-bit for
+1
Thanks AJA customer service - Hector
by Chuck Pullen 7 years ago
One my studio clients had a Ki-Pro that wouldn t power up. I contacted customer service and got a fast response from Hector. By the next day there was a new Ki-Pro on it s way to me. No hassles, no de
Re: Thanks AJA customer service - Hector
by Rodrigo Allendes-Fernandez 7 years ago
Yeap, I got a RMA response too. Ultra fast and quick!! These guys know their job, and they put in your shoes when you have to respond to a client too. Thanks a lot! Rodrigo Allendes-Fernandez Video As
VP pro11 issues
by Phil Seymour 7 years ago
Well, I loaded VP11 and finished a project with footage from my EX3. All edited well and rendered except for a render to mov which didn't work, but John Rofrano posted a work-around. So then I capture
Re: VP pro11 issues
by Chuck Pullen 7 years ago
Well Phil, welcome to the club! As I mentioned the other day, I had the exact same issues after installing 11 as well. I have had that same Nvidia driver crash, and yes you do have the latest driver f
LTC timecode distribution
by Paul Rozon 7 years ago
I need to have matching timecode on multiple cameras and iso decks. We have an audio mobile truck coming in (pro toools rig)who will be generating the LTC from Telcom Research T5010. This unit outputs
Re: LTC timecode distribution
by Chuck Pullen 7 years ago
Best solution would be to adapt from XLR to BNC. I think Markertek has a cable for that, which would then feed a regular BNC DA. Chuck
Corrupt File Still Plays on the Ki-Pro
by Chuck Pullen 7 years ago
So I have a single file recorded on my Ki-Pro drive that keeps coming up corrupt on my PC. The weird thing is that I can still play the file on the Ki-Pro. I am assuming this is a case of not ejecting
Re: Corrupt File Still Plays on the Ki-Pro
by Chuck Pullen 7 years ago
Jeremy Garchow "I would format the drive in the KiPro once you are done transferring. It's the best way to ensure you have a "good seal"." I will certainly do that before my next recording. Jeremy Ga
File Based Off Air Recording-Somebody sell me something!
by Dixon Johnston 8 years ago
Hi everyone, I dont know if this is the right forum, so Im copying it to Broadcast engineering too. Im sure someone will point me in the right direction. I am looking for a file based solution to reco
Re: File Based Off Air Recording-Somebody sell me something!
by Chuck Pullen 8 years ago
The Volicon Observer my friend... http: www.volicon.com Chuck Pullen
30p vs 60i for Broadcast news segment
by john currie 8 years ago
Hi Everyone, I'm shooting a series of short inserts for broadcast news and I'm wondering if 60i is preferable to 30p for any reason at all. Or what the advantages of each would be. I've already shot t
Re: 30p vs 60i for Broadcast news segment
by Chuck Pullen 8 years ago
I lean towards P. I shoot stuff with lots movement, and seem to have occasional issues with i, so thats my vote! Chuck
Coax/SDI cables?
by Kristen Jorgensen 8 years ago
Hello! I'm very interested in getting the DeckLink Duo for our online streaming (we use Dazzles now and they make our NEW computer blue screen all the time...apparently this is a common problem with t
Re: Coax/SDI cables?
by Chuck Pullen 8 years ago
The Dazzle uses RCA's correct By Coax do you mean Belden cable or something from Radio Shack If it's real coax cable it should already have BNC connecters on it if not, you can always get adapters (RC
Where to buy Breakout cables for old Blackmagic cards?
by Ben Pirouet 8 years ago
I live in the UK, and as part of our studio setup, we have an old Power Mac G5 with a Blackmagic Decklink "HD Plus" PCIX card. The breakout cable went missing in a recent move. I've tried and failed t
Re: Where to buy Breakout cables for old Blackmagic cards?
by Chuck Pullen 8 years ago
If you strike out, I have a breakout from a failed card that may work for you here in the states. I know it was a PCI-X card, not sure which one but I think it is one in the same. Chuck
Live Broadcast Character Generator
by James Hauge 8 years ago
Good day everyone! I work for a Christian Non-Profit television station and we need to replace our CG computer... I've been doing some google searching and it seems that I'm not really finding what I'
Re: Live Broadcast Character Generator
by Chuck Pullen 8 years ago
I've been quite impressed with Compix. I think they are working on releasing something like this. Let me know what you decide as I'm looking for the same thing. Chuck
What type of power connection is this?
by Matthew Altheim 8 years ago
Hey guys, this is a picture of a 10A power output just above my battery connection on my JVC gy-hm790u. I was hoping someone knows what type of connection plug this is. (I searched through the manual
Re: What type of power connection is this?
by Chuck Pullen 8 years ago
The PowerTap is quite useful depending on your needs. I use it to power my Ultralight 2, and to charge my Firestore. You can also get adapters to power most wireless receivers as well. Chuck
Any ideas on how this was done?
by Chuck Pullen 8 years ago
WGN in Chicago has been running this new promo, and I really love the look. Anyone have any ideas on how it is done http: gizmodo.com 5830648 seeing-chicago-like-this-makes-me-want-to-go-even-more Chu
Re: Any ideas on how this was done?
by Chuck Pullen 8 years ago
Thanks Walter, I had an idea in mind, and it would include some stock footage, so everything would probably start as full motion HD video. Besides the Magic Bullet plug-in, what would the frame rate m
Looking for combo translation, VO and subtitling services in Chicago
by Mark Suszko 8 years ago
I have a 10-minute program that needs to have audio translations and subtitling work done. The master is in English, we're looking to get it back on a DVD with an audio track voiced in Polish and one
Re: Looking for combo translation, VO and subtitling services in Chicago
by Chuck Pullen 8 years ago
Hey Mark, I think TeleVersions might be able to do that, or might know someone who does. http: televersions.com Chuck
JVC 250: Blue out of alignment?
by Chuck Pullen 8 years ago
I turned on my 250 yesterday, and the blue was clearly out of alignment. I had just used it the day before and the images were fine. I m wondering if anyone has run into this before, and what might be
Re: JVC 250: Blue out of alignment?
by Chuck Pullen 8 years ago
Thanks for jumping into the conversation guys. Dennis, any chance you can walk me through the process that you used to get to that point Chris, I may be sending my camera over to you if it is indeed t
Mastering Multicamera: Similar Editing Exercises Available?
by Matt Mealer 8 years ago
I just finished reading Mitch Jacobson's Mastering Multicamera. Fantastic book; very enjoyable to read and learn from. It was a lot of fun to practice cutting live music using the concert video record
Re: Mastering Multicamera: Similar Editing Exercises Available?
by Chuck Pullen 8 years ago
I was just thinking of Mitch s book, as U2 was playing here in Chicago last night, and I wondered if he was in town. I never got around to trying his extras disc, but please share if you do come acros
Cameraman Fail!
by Chuck Pullen 8 years ago
I'll let the video speak for itself. http: failblog.org 2011 06 27 epic-fail-photos-cameraman-fail Chuck
Re: Cameraman Fail!
by Chuck Pullen 8 years ago
Mark, I am going to consider the timing of your post a mere coincidence and not an ominous warning of the worst possible outcome of my next shoot. I am planning the exact same shot to open a show this
Live Video Feed for Theatrical Event: Cabling advice needed
by Daniel Horitz 8 years ago
Hello peoples, I am involved in a sight-specific theatre show in an old water pumping warehouse in which I will be dressed as a deep sea diver with a video camera. I will be filming an actor as we wal
Re: Live Video Feed for Theatrical Event: Cabling advice needed
by Chuck Pullen 8 years ago
I must have missed why you need the audio The one thing I would say, is that in the production world, you want to keep your audio and video separate as much as possible. That being the case, if it wer
What Conan thinks of FC-X
by Chuck Pullen 8 years ago
Here's what Conan O'Brien has to say about FC-X! http: www.youtube.com watch v=ywNG6GXBZuU&feature=player_embedded
Re: What Conan thinks of FC-X
by Chuck Pullen 8 years ago
That was really cute...sneaking in a Vegas slam. I always thought Hitler would be a Mac guy! Chuck
FCP-X: Case study for biz schools
by Mark Raudonis 8 years ago
Mark my words: Apple's handling of the release of FCP-X will be fodder for biz schools case studies long into the future. It's too early to know if they'll be studying it as a success story or as a sp
Re: FCP-X: Case study for biz schools
by Chuck Pullen 8 years ago
Scott Sheriff "- Have general knowledge of celebrities." "* Compensation: $15 per hour"" Sounds like TMZ is hiring! Chuck
Ouch
by Scott Carnegie 8 years ago
A potential client contacted me a few weeks ago about making a marketing video for them. Someone had volunteered to do one for free and they didn't like the results so they looked for a professional.
Re: Ouch
by Chuck Pullen 8 years ago
Scott, don t be surprised when they suggest the amateur call you for advice on their project since you were so knowledgeable and helpful I ve had that happen before. Chuck
Have Some Tough Desions to make.....
by Greg Burke 8 years ago
Hey all I have some tough decisions to make since the Release of FCP X. This release will cripple my Freelance FCP7 work, I mean why pay me money, when FCP X is so easy to use now, and Post houses sur
Re: Have Some Tough Desions to make.....
by Chuck Pullen 8 years ago
I m going to second Greg on this one. All of you are basing your arguments on the fact that you believe that most of your clients care more about quality then economy. His point is that many of his cl
HD multicam guidance
by Ian Fuchs 8 years ago
Salutations! (Newbie to Creative COW) I am working on a set up for the college I work at and trying to develop an affordable and functional system for doing 3-4 camera set up for live events. Currentl
Re: HD multicam guidance
by Chuck Pullen 8 years ago
I think one time we calculated the delay at around half of what you are experiencing. I would double check that you don't accidentally have some extra effects activated. Other than that, try the diffe
Panasonic AG-HMX100
by Aj Simeone 8 years ago
I'm curious if anyone knows if it will take video signal going through an RCA to BNC wire. And same with output, if I can use any monitor going from BNC to RCA. Thank you
Re: Panasonic AG-HMX100
by Chuck Pullen 8 years ago
Phil makes a good point. If you are saying you are trying to take the SDI output of this mixer and use it with a monitor that has an RCA video input, you may have a problem. As far as I know there is
© 2019 CreativeCOW.net All Rights Reserved
[TOP]