Chris Lambert: Activity About
Chris Lambert

Member Since:
March 31st 2010
66 Posts
FCPX and Stabalisation
by Chris Lambert 5 years ago
Hi everyone I am currently editing a live event about 7hrs and want to take some of the edge off of some of the zooms which went a little dodgy throughout the day. I'm editing on a 2013 Macbook Pro re
Re: FCPX and Stabalisation
by Craig Alan 5 years ago
Can compressor do the trick Mac Pro, macbook pro, Imacs (i7); Canon 5D Mark III 70D, Panasonic AG-HPX170 AG-HPX250P, Canon HV40, Sony Z7U VX2000 PD170; FCP 6 certified; FCP X write professionally for
FCPX re analysing footage
by Chris Lambert 5 years ago
Hi I am trying to stabalise a long sequence of footage but FCPX seems to be analysing it again and again and again. Does anyone know why this could be occurring it is a long clip approx 40min so it is
Corrupt frames in FAT32 formatted SDHC card
by Chris Lambert 6 years ago
Hi everyone I have run into a major snag with a job I am currently on the Sandisk Extreme 64gb SDHC card that I was using in an adapter wont let me copy from my cards to my mac using any xdcam softwar
Re: Corrupt frames in FAT32 formatted SDHC card
by Chris Lambert 6 years ago
Hi Ian I'd be happy to link it to you in the end I went with a file recovery company to salvage it. They did something using terminal to copy the file from one location to another (something find woul
XDCAM and FCPX
by Chris Lambert 6 years ago
Hi everyone Has anyone else ran into a massive performance issue when using FCPX to work natively with XDCAM (EX3 files) using the recent update to import them straight into the program as camera file
Re: XDCAM and FCPX
by Chris Lambert 6 years ago
Hi Jeff Yes it was kind of a stealthy update about 1-2months ago that I don't think many people have discovered because of our tried and tested workflows. My advice in short would be stick with what w
Is it possible to publish the stabalizer effect back into FCPX
by Chris Lambert 6 years ago
This may seem like an odd request but I am currently able to stabalize footage in a multicam clip of an event that I am editing in which one of the cameras was a bit wobbly. When I click on the clip i
Re: Is it possible to publish the stabalizer effect back into FCPX
by Mark Spencer 6 years ago
No, you can't publish a Motion effect that stabilizes. Why not locate that clip in the event, set a range for the shaky part, and stabilize it there It should pass through to your multicam edit automa
Quicktime 10 crash whilst recording event audio recovery
by Chris Lambert 6 years ago
Hi everyone I've recently run into a massive problem whilst shooting an event and running an events mixer into my line in on my Macbook Pro OSX ML and Quicktime 10 I left the program running for 4hr's
Re: Quicktime 10 crash whilst recording event audio recovery
by Chris Lambert 6 years ago
Thank you Jean I'll have a dabble and see what I can do. Absolutely agree this is probably the most careless I've been in just assuming something would work as Quicktime has never let me down before a
Thunderbolt on BMC
by Chris Lambert 7 years ago
Hi everyone I think If I recall there was some mention of being able to record to mac via the thunderbolt cable on the BMPC at NAB. Does this mean that we can use the Camera as a dock to transfer foot
Re: Thunderbolt on BMC
by Chris Lambert 7 years ago
Thanks Peter that does sound about right. cheers
Apple Compressor 4 writing to main HDD
by Chris Lambert 7 years ago
Hi everyone I am currently attempting to export a 40min 30gig Pro Res file into a h264 for web distribution in Apple compressor but no matter what I seem to try Compressor seems to be writing huge amo
Re: Apple Compressor 4 writing to main HDD
by David Eaks 7 years ago
I assume you have the destination for the Job set to your media drive I like the default destination set as same as source. If you open Compressor, with nothing currently processing, and click "clear"
Apply effect to all clip in event
by Chris Lambert 7 years ago
Would anyone happen to know if it is possible to apply an effect across all the clips in a group I am currently editing some footage shot on a DOF adapter with a flipped image which needs 180degree ro
Re: Apply effect to all clip in event
by Chris Lambert 7 years ago
Thanks Tom, would a multicam clip with timecode based around clip date, relink back to the originals in this way and allow viewing from the event browser as well as keeping the analysis size down Not
Keyframing
by Chris Lambert 7 years ago
Hi I'm trying to use SliceX in FCPX but am having serious trouble keyframing anything I have tried using it in an adjustment layer and on the clip but no options exist for anything. Am I doing somethi
Re: Keyframing
by Chris Lambert 7 years ago
is this something we can expect to see added in at a later date
EX3 Ch2 problem when Ch1-2 recording
by Chris Lambert 7 years ago
Hi everyone Recently experienced this problem twice and maybe it's something incredibly basic I'm overlooking but I've experienced twice over the last month both at key moments in interviews and reall
Re: EX3 Ch2 problem when Ch1-2 recording
by Michael Palmer 7 years ago
Go into the audio menu input and look for an input db setting and match it to the good channel. Sound people sometimes change these setting for their mica and you my need to reset it back. I think for
FCPX exporting corrupted clips
by Chris Lambert 7 years ago
Hi everyone I am currently trying to export a file from FCPX for mixing down to DVD but am encountering some major issues in exporting whenever I export a certain project file I am met with the error
Re: FCPX exporting corrupted clips
by Chris Lambert 7 years ago
Just tried with a similiar project dumped 4 clips onto the timeline spanning about 4-5hrs and same problem on export seems something is broken in FCPX once projects go over a certain length. As shorte
Missing part of the footage, timecode ok
by zbigniew brzezinski 7 years ago
Hello after importing the clips from my ex3 through XDCAM transfer I've noticed that a short part of the clip is missing. I shoot continuously for 2.5h and ended up with 3 files, two of which don't co
Re: Missing part of the footage, timecode ok
by Chris Lambert 7 years ago
Was the original card formatted to FAT It has a maximum size of 4gb's a file or about 20min of footage so you may have ended up with split clip (a symbol should appear to denote that). If you import d
XDCAM Vanishing Clips
by James Blackburn 7 years ago
Hello, I have just finished filming and returned to back up the my 32GB Original SxS Card from my EX3 There appears to me 2 clips from the start of the day are missing. I checked the BPAV folder struc
Re: XDCAM Vanishing Clips
by Chris Lambert 7 years ago
Ran into this very problem today, first time i've ever seen it in nearly 3yr's of using the camera. should have been at least two clips from a take but after ejecting the card and putting it in the ma
The return of the dof adapter?
by Chris Lambert 7 years ago
Is there a reason why I haven't seen this mentioned RE: the BMC Is there a reason why the Letus's, Sg Blades of the world would not be able to make a resurgence if we found a way to make this work Wou
Re: The return of the dof adapter?
by Marco Solorio 7 years ago
I agree with Peter. DOF adapters came and went. The height of their arrival was because HDSLR cameras hadn't been released yet. When those came, people started shooting on those for their narrow DOF,
Macbook Pro purchased Aug 2011 Keep having issues with 32gb SanDisk Ex Pro 95mbps cards
by Chris Lambert 7 years ago
Hi all I purchased a Mac running OSX Lion last year but recently it has started showing error code 36 with two memory cards (both Sandisk Extreme Pro 95mbps) everything else is fine but with these it
Re: Macbook Pro purchased Aug 2011 Keep having issues with 32gb SanDisk Ex Pro 95mbps cards
by Chris Lambert 7 years ago
Files all work fine...eventually. when I first had this problem I assumed it was the card dying and returned it too Amazon for a replacement but the new one started doing it straight away only on the
XDCAM EX Import plugin for FCPX 10.0.4 coming?
by Craig Seeman 8 years ago
XDCAM EX Import plugin for FCPX 10.0.4 coming The Twitter verse has been all a twitter about the plugin "announced" coming soon.
Re: XDCAM EX Import plugin for FCPX 10.0.4 coming?
by Chris Lambert 8 years ago
Here's hoping! Now if Sony could just patch 50mbps into all the SxS card based cameras or just the EX3 then it would be high five's all round! come on Sony make my month!
FCPX and XDCAM update
by Chris Lambert 8 years ago
Remember hearing about a XDCAM clipbrowser transfer xmf or whatever oter method of getting the files into the program aside from the .mov rewrap we all hate. Is there any news on this ever coming to l
Re: FCPX and XDCAM update
by Ian Cook 8 years ago
http: forums.creativecow.net readpost 142 877935
FCPX at BVE London
by Ben Holmes 8 years ago
I spent the day at the BVE show in London today. Whilst not a big show, it was notable that there was an extremely busy FCPX demo stand being run by Soho Editors. You could not get in all day. I also
Re: FCPX at BVE London
by Chris Lambert 8 years ago
I was also there but didn't pop in but the fact that BVE and the Northern version (which i did a promo for last Nov) are the only shows like this in the UK and Apple were clearly pushing FCPX in that
Just bought EX3 and was unaware of the horizontal flip
by Chris Lambert 8 years ago
A big case of what you dont know coming up to bite you in the ass, I just purchased a SG Blade one of the last 3 of its kind. I did know about the vertical flip of the image but just intended to flick
Fianl Cut ProX update 10.03 disables program. Can I still get back the previous version???
by Craig Shamwell 8 years ago
This is about as frustrating as it can be. Here is what has happened to me: I launch FCPX and once its up, it starts rendering....slowly. And I don't know just what.! Whether I a in the Project Pane o
+1
Ilan Golan liked this 8 years ago
Re: Fianl Cut ProX update 10.03 disables program. Can I still get back the previous version???
by Chris Lambert 8 years ago
Any joy I hope were not going to have too wait another 2-3months for another update too make this program workable! I stuck with FCPX through all the initial problems but its been a week and nothing i
Shuttle 2???
by Rafael Metz 8 years ago
Hello, I ve just read about the Hyperdeck Shuttle 2. Does this mean I can throw my Shuttle right into trash because DNxHD recording will not be able with it via software update Greetings Rafael
Re: Shuttle 2???
by Chris Lambert 8 years ago
Is there any hope for us early adopters being able to mail in there Shuttle 1's for a chip upgrade I'd happily pay for it though I'd prefer not to.
HyperDeck Shuttle - add ProRes?
by Sean Thomas 8 years ago
Exciting news to see DNx added to the Studio version. Is there anyway to add ProRes to the shuttle That's the only reason I'm not buying it now. Really don't want uncompressed and those huge files.
Re: HyperDeck Shuttle - add ProRes?
by Chris Lambert 8 years ago
Please god yes, I'd happily settle for DNX if there was a easy way to get it into FCP. Until SSD's come down in price HyperDeck need to implement something like this to really corner the market!
Photo Jpeg blandness in image
by Chris Lambert 10 years ago
Hi everyone I am currently trying to export XDCAM footage from Avid Media Composer in Photo Jpeg at 95% quality I keep finding that the image is bland and almost desaturated compared to the original i
Re: Photo Jpeg blandness in image
by Chris Lambert 10 years ago
Hi Daniel Thanks for the quick response my comparisons are currently being performed by exporting an uncompressed quicktime and a photojpg and then clicking between the different quicktime files on th
© 2019 CreativeCOW.net All Rights Reserved
[TOP]