In-Camera Card Copy Stuck at 95% by Chris Elley 9 years ago Panasonic AF100 Whenever I attempt to copy a card in-camera from Slot 1 (shot content) to Slot 2 (formatted, empty), the progress bar chugs along nicely until it reaches 95% and then just stops. Both
Re: In-Camera Card Copy Stuck at 95% by chris li 9 years ago Just be patient. How big is your card I have the same experience where progress bar quickly jumps to 95% completed and then just hangs for maybe 10min for a full 16gb card- never timed it but it felt
XDCAM HD 720p 23.98 Frame Rate Issue in FCP by Chris Elley 10 years ago Little did we know that there is no XDCAM HD codec in FCP that is 720p at 23.98, however that is a setting that is available on on the PDW-700 camera. We had a PDW-700 join us on an otherwise DVCPRO H
Speech Transcript by John Frey 10 years ago When I first switched over to PPro CS4 as my primary NLE, I tested the speech-to-text function. It did do the audio file transcription and the text appeared in the metadata window under speech transcr
Re: Speech Transcript by Chris Elley 10 years ago I was having trouble getting the text to copy into Word. However, I found that it copied fine into Text Edit. From Text Edit, you can copy to Word. Chris Elley Electro-Fish Media Inc. Austin, Texas el
Tape Varicam in P2 Workflow by Chris Elley 11 years ago We have been shooting a program entirely on P2 with great results. For various reasons, we will have to add a traditional tape-based Varicam to the mix for several shoots without the luxury of a deck.
Re: Tape Varicam in P2 Workflow by Chris Elley 11 years ago It's probably a stretch, but would it work to run TC OUT from the camera to REF IN on the Kona (in addition to HD SDI) I doubt the Kona utilizes the REF IN when the input is set to HD SDI, nor am I co
Out of Memory Because of Too Much Footage? by Chris Elley 13 years ago (FCP 6.0.2 on Mac Pro 8-core Tiger with 8GB RAM) We have a project that has 23 days worth of footage in DVCPRO HD 24pn. For easy math, it's right around 100 hours of footage. All of it has been import
18 db User Switch on HPX 500 by Chris Elley 13 years ago We love our HPX500. We began testing it about a month ago, and couldn't help but buy it. There's a lot in this camera. So far, I have only found one function I can't get to work. Perhaps Jan or anothe
CAC on HPX500 Lenses by Chris Elley 13 years ago We're really pleased with the performance of an HPX500 we've been testing for a few weeks, however we have not had access to any of the "CAC" capable lenses from Canon or Fujinon that are packaged spe
Re: CAC on HPX500 Lenses by Chris Elley 13 years ago Thank you all for your responses. I have no problem spending an extra $1,000 or so for CAC. My question arose, because I was looking for a lens that is wider than 16x. There is another Canon in the HD
HVX-200 firmware version by Shane Ross 13 years ago How do I find out what the firmware version of an HVX-200 is I hear it is a hidden menu item. I need this for troubleshooting... Shane Littlefrog Post www.lfhd.net
Re: HVX-200 firmware version by Chris Elley 13 years ago Just to clarify, I found the firmware upgrade file for the HVX200 at the following page: https: eww.pavc.panasonic.co.jp pro-av support cs csregistp2m p2indexe.html I am entering this in the forum bec
Slow Firewire on Dell Latitude by Chris Elley 14 years ago The last Avid certified laptop we have is a Dell Latitude D800. The firewire port has now completely flaked out on us, intermittently testing anywhere from 1MB sec to 28 MB sec. Has anyone had this ha
Re: Slow Firewire on Dell Latitude by Chris Elley 14 years ago Great suggestion. However, this afternoon Dell technical support officially diagnosed this as a bad motherboard on the laptop, and it is being replaced. Thank you for your input.