Arnljot Bringedal: Activity About
Arnljot Bringedal

Member Since:
January 5th 2007
257 Posts
100 posts
Location:
Oslo - Norway
Friends:

Tony Murphy
Error message
by Arnljot Bringedal 9 years ago
I get the following message when I open resolve on my mac pro: " Attention: the following cards are being used for core processing: Gt 120 - the recommended cards are : gtx 285, etc etc etc " The thin
Re: Error message
by Arnljot Bringedal 9 years ago
Can you check you haven't got your monitor plugged into the GTX 285: Checked Your Nvidia Driver is up to date: Uncertain - cannot find a version later than 2009 Your CUDA Driver is up to date : Checke
Now dust has settles a little what video card should I upgrade to
by Ben Edwards 9 years ago
Hi, sorry to bring this up again but I would really love to Buy FCP X to run on my 2008 Mac Pro but the video card thing is doing my head in. I know apple want me to but a new mac or jump shop to Prem
Re: Now dust has settles a little what video card should I upgrade to
by Arnljot Bringedal 9 years ago
buy the GTX 285. They go cheap on Ebay etc...... Great card - and You can use it with Davinci Resolve *** Norwegian videojournalist & Editor***
Artist Transport & Artist Color
by Arnljot Bringedal 9 years ago
Artist Transport: Is it working with resolve now Artist Color: Debating this one against the Tangent Wave - thoughts *** Norwegian videojournalist & Editor***
Re: Artist Transport & Artist Color
by Peter Brewer 9 years ago
I hope they make the Transport work too Peter Brewer www.indimax.com.au
Cards and more cards
by Arnljot Bringedal 9 years ago
Im on a 3,1 mac pro - I have the gtx 285 installed - and Im wondering if I put in my old Radeon HD 2600 for the GUI part I asked this earlier, but the thread was not clearly answered. I also have a 88
Re: Cards and more cards
by peszteres lászló 9 years ago
Hi, My system is very fine and smooth....... DaVinci 8.0 OSX 10.6.8 Apple-MacPro 3.1 RAID 16TB mini-sas GTX 285 GT 8800 Redrocket DeckLink HD Extreme JLCooper-Eclipse
Will this work?
by Arnljot Bringedal 9 years ago
Im considering the ReSolve for OSX - and Im looking into if I can run it on my existing hardware: 2008 macpro ( 3,1 version ) I have a Radeon HD 2600 in the Mac as of now, but theres a GTX285 lying ar
Re: Will this work?
by Christopher Adams 9 years ago
I added these to debug for my macbook pro 2.93 works fine so far. no more error. even on Lion 10.7 For Resolve 8.0.3 LsManager.3.NumGPUs = 1 LsManager.3.GPUMapping = 0 LsManager.3.GPUMappingEnable = 1
FCP7 in a box
by Arnljot Bringedal 9 years ago
As i am a videojournalist that edits mostly on laptops in the field, I am not in the same wagon as those running a fully-specced FCP house. I have a boxed FCS3 for those that want it - if anyone wants
Re: FCP7 in a box
by Ben Holmes 9 years ago
I would be interested. Contact me. Will pay sensible price. Ben Edit Out Ltd ---------------------------- FCP Editor Trainer System Consultant EVS VT Supervisor for live broadcast RED camera transfer
Hardware Question
by Arnljot Bringedal 9 years ago
I am on a Macpro 3,1 ( early 2008 ) - 8 cores, 32 RAM. I obviously need a new graphic-card, as the Appstore would not let me download X because my graphic card was not supported. ( ATI Radeon HD 2600
Re: MacPro 3.1 and Radeon 5770 5870?
by Craig Seeman 9 years ago
Regardless whether Apple "supports" it, the 5770 works all the way back to 1.1. I just installed it on 3.1 and it's working fine. I haven't heard anyone needing a new card for 3.2. Only 1.1, 2.1, 3,1
Setup question
by Arnljot Bringedal 9 years ago
I have a decklink HD extreme 2 in my Mac Pro. I edit EOS 5dmII footage only - in ProRes 422 HQ in FCP. I shoot and edit in 25fps. I have a huge plasma LCD-TV that I want to output 1080p to. Can anyone
Re: Setup question
by Arnljot Bringedal 9 years ago
Thank you *** Norwegian videojournalist & Editor***
Output setting - decklink HD extreme 2
by Arnljot Bringedal 10 years ago
Hey guys! I have had a Decklink HD extreme 2 in my Macpro for quite a while, but have actually never used it. Now I intend to however :-) Anyways: In my FCP timeline I have put Canon DSLR video shot w
Re: Output setting - decklink HD extreme 2
by Kristian Lam 10 years ago
Hi, Try - Blackmagic HDTV 1080p 23.98 - Apple ProRes(HQ) regards Kristian Lam Blackmagic Design
Advice on RAID purchase
by Arnljot Bringedal 11 years ago
I need another RAID to backup my primary RAID. My primary RAID is a relatively fast 6 disk unit RAID 5 configured E-SATA connected device. The new one that I am looking for does not need to be an ver
Re: Advice on RAID purchase
by Jason Lyons 11 years ago
Lacie 4big Quadra. Sounds perfect for you. http: www.lacie.com us products product.htm pid=11113 A side note: I have the network version of this solution and it works really well especially if you wan
Anyone running FCS2 under Snow leopard beta?
by Arnljot Bringedal 11 years ago
Anyone running FCP under Snow leopard beta I am fully aware that there are no pros in doing this in regards to performance, but Im wondering if the current FCS2 will run or not
Re: Anyone running FCS2 under Snow leopard beta?
by walter biscardi 11 years ago
Is there a public beta now I wasn't aware of one. Walter Biscardi, Jr. Editor, Colorist, Director, Writer, Consultant, Author. Credits include multiple Emmy, Telly, Aurora and Peabody Awards. Biscardi
easiest way to do this?: convert a whole bunch of clips to ProRes
by Arnljot Bringedal 11 years ago
I have 290 clips of h.264 from the 5D mk2. How do I go about encoding them into ProRes 422 HQ in the least labour intensive way
Re: easiest way to do this?: convert a whole bunch of clips to ProRes
by Arnljot Bringedal 11 years ago
Thanks guys! *** Norwegian videojournalist & Editor***
5d MKII footage - how to proceed?
by Arnljot Bringedal 11 years ago
Just received some footage from the 5d mk2 - and Im a bit unsure on how to proceed. The final product should be for "PAL land" .... and grading is required.... Workflow tips anyone *** Norwegian vide
Re: 5d MKII footage - how to proceed?
by Arnljot Bringedal 11 years ago
;-) *** Norwegian videojournalist & Editor***
cannot capture 1080i Prores on pre2008 Mac Pro
by Joe Procopio 11 years ago
system is identical to my 2008 mac, going to fiber drives...but I cannot capture any prores HD to either pre 2008 MacPros pre 2008 8gb ram, Kona 3 (card in slot 3) Atto 41ES in slot 4...1900XT video c
Re: cannot capture 1080i Prores on pre2008 Mac Pro
by Arnljot Bringedal 11 years ago
My impressive deductive skills has made me come to the conclusion that he is on a 8 core mac pro - the version released before the start of 2008. *** Norwegian videojournalist & Editor***
Audio monitoring problems
by Arnljot Bringedal 11 years ago
I have the BM HD extreme 2 - and a pair of Active speakers connected to it..... The audio is WAY to high.... And Im not able to fix it..... I heard of someone experiencing the same thing - and they ha
Re: Audio monitoring problems
by Arnljot Bringedal 11 years ago
http: www.adam-audio.de studio nearfield a7_data.htm *** Norwegian videojournalist & Editor***
Computer Monitor as a Reference Monitor?
by Bob Holbrook 11 years ago
Does anyone have experience using a hi res computer monitor, fast (2ms) as a Reference Monitor I've read one article in an industry Mag where the editor said his $500, 24 inch DVI input monitor, calib
Re: Computer Monitor as a Reference Monitor?
by Arnljot Bringedal 11 years ago
Walter: the Panasonic TH42PH11UK that you and Bob mention.... You use it as a reference monitor the AJA hI5 ... I have a BMD with HDMI out - will this suffice *** Norwegian videojournalist & Editor***
New FCP rumor from macnn
by Dave Jenkins 11 years ago
Apple is indeed on the verge of releasing a new version of Final Cut Studio, new sources are said to corroborate. Although some sources have suggested than an updated Final Cut Studio suite could be a
The Shake replacement
by Arnljot Bringedal 11 years ago
I mm sure the rumour about replacing SHAKE is true. Apple just decided to wait until most of us bought NUKE ;-) .. That makes sense right right right *** Norwegian videojournalist & Editor***
Software Video Clip Switcher
by George Stofberg 12 years ago
Hi Guys First I must say that I have no idea where this post belongs, but here goes. I am looking for a simple clip video switcher that will enable me to load the clips, so that they can be triggered
Re: Software Video Clip Switcher
by Arnljot Bringedal 11 years ago
Windows only - but u can botcamp your way around it: avtake.com "Cutfour" *** Norwegian videojournalist & Editor***
Anyone using Apple TV?
by John Barnard 11 years ago
It seems like it might be an easy way to watch edits at home in HD without having to burn a bluray disc.Blackmagic Multibridge Final Cut 6 Mac Pro Model Identifier: MacPro1,1 Processor Name: Dual-Core
Re: Anyone using Apple TV?
by Arnljot Bringedal 11 years ago
I do exactly this - works great - is 1080P after the last upgrade to the firmware, as far as I can see from the menu-settings I have done 720P only so far - looks lovely*** Norwegian videojournalist &
Would this work?
by Arnljot Bringedal 11 years ago
2 cams - wirecast - Adobe live media encoder - Flash media server... Is this possible How would you guys go about The adobe live media encoder needs a DV signal in..... *** Norwegian videojournalist &
Re: Would this work?
by Bruno Souza 11 years ago
So, is there any way to integrate wowza and FMS I mean push the RTSP stream to Wowza and then push it forward (RTMP) to and FMS so I can delivery it in my existent infrastructure...
Problems choosing shutter for this shot
by Arnljot Bringedal 11 years ago
how would you guys do this shot Obviously its motionblurred - Im thinking slow shutter, but I dont seem to find a god setting. I have tried 25p 50th sec and 100th sec - both are to blurred, Please hel
Re: Problems choosing shutter for this shot
by Arnljot Bringedal 11 years ago
vimeo is active now. How would you guys use the cam for this kind of fast move
NO CS4 drivers - I don´t get it: look at this:
by Arnljot Bringedal 12 years ago
http: decklink.com press detail.asp pressID=143 Short version: Blackmagic is going on tour with adobe india to showcase cs4 on the 18th to 21st of november! That must surely mean the new cs4 drivers a
Re: NO CS4 drivers - I don´t get it: look at this:
by Brett Kelly 11 years ago
The drivers are very close, they had to wait for the 4.0.1 patch which is now out so they should not be far off. Sometime this week I would imagine.
Can the EX1 do this?
by Arnljot Bringedal 12 years ago
found this in the cow Indie-forum : "I very frequently plug the Shure SM 89 into the Panasonic AG-HVX200, and I plug the mic into channel 2, and I set channel 1 to record channel 2. One dial handles c
Re: Can the EX1 do this?
by Klaas van Urk 12 years ago
Yes you can... First flip the switches from both channel 1 and 2 to manual and external. Then press the menu button and go to the bottom of the audio input menu. Choose EXT CH Select: CH-1 By doing th
6.8.3 - CS4 oK?
by Arnljot Bringedal 12 years ago
6.8.3 - CS4 OK If not - when Dont go Apple on us and leave us in the dark!
Re: 6.8.3 - CS4 oK?
by Peter Corbett 12 years ago
Not yet Becker. They're working on it. It may be a couple of weeks at least I think.Peter Corbett Powerhouse Productions www.php.com.au
XDCAM EX-1 System Crash/Freezing ??
by Spencer Kiernan 12 years ago
I am using a brand new XDCAM EX-1 for the first time, and it keeps freezing up after only a few minutes of use. The problem happens in both stand-by and record mode. And it's happening constantly (eve
Re: XDCAM EX-1 System Crash/Freezing ??
by Arnljot Bringedal 12 years ago
The B&H comment: I have recently started buying alot from them. Mainly because they ship fast - and are reasonably prized... Do you have problems with them I have never had to send back anything yet,
Is macbook pro 2.16 ghz sufficient?
by Dave Raizman 12 years ago
I've got an ex1 and I'm picking up a macbook pro for dumping the footage and reviewing it in the field as well as some simple editing. The macbook pro has the following specs: Intel duo core 2.16 ghz
Re: Is macbook pro 2.16 ghz sufficient?
by Arnljot Bringedal 12 years ago
YES!*** Norwegian videojournalist & Editor***
EX1 firmware 1.11 features
by Craig Seeman 12 years ago
Sony Canada PDF on EX1 firmware upgrade features It always seems to be Sony Canada that goes public with stuff first.
Retraction
by Arnljot Bringedal 12 years ago
I misunderstood. The ability to record 4..2.2 to external source - ( via a BMD or KONA ) - was what I was looking for. *** Norwegian videojournalist & Editor***
EX1 - to decklink extreme HD - and final cut- no joy
by Arnljot Bringedal 12 years ago
HeY! Just installed a decklink HD extreme. Connected the EX1 to the HD-SDI in - via BNC. Enabled HD-SDI out from the EX1 menu. Set ex1 to 720p 24 Started FCP . Opened log and capture No image - says n
Re: EX1 - to decklink extreme HD - and final cut- no joy
by Arnljot Bringedal 12 years ago
Thanks Daniel... I feel cheated by my dealer though... I would really like to capture 24P somehow..... Just checked the specs for KONA 3 : no 1080 24P there either........ surprised about that*** Norw
Web TV live production
by Arnljot Bringedal 12 years ago
Hey! Have been asked to stream a shoot live in August, so for once Im gonna do some research well beforehand. The media encoder seems easy enough to use at first glance. Ive been able to make a connec
Keying without plates
by S. Marcotte 12 years ago
How unusual is it to build mattes without the completed background in place In my limited experience, it's very difficult to work the matte's edges without seeing them in their actual place of busines
Re: Keying without plates
by Arnljot Bringedal 12 years ago
Maybe I misunderstood, but I check my keyed objects over a simple white to black gradient, which i move around a bit. Works for me*** Norwegian videojournalist & Editor***
test
by Arnljot Bringedal 12 years ago

Unable to print
by Arnljot Bringedal 12 years ago
Hey! Unable to print from indesign..... Actually: Unable to print from all adobe products, except acrobat.... Printer : Samsung cl-550n - I am on the mac. The printer works in all my other apps. Does
Re: Unable to print
by Jacki Schklar 12 years ago
Could he try reinstalling or updating his printer driver
Key out black - detonationfilms
by Arnljot Bringedal 13 years ago
Hey guys! Need to composite footage of smoke & fire on daylight footage. The footage with the FX are on a black background - and are not prekeyed. Im not pleased with the results io am getting so far
Re: Blending Modes
by Alex Serban 7 years ago
"channels-set matte also if something is too transperant toss curves on it, go to the individual channels and select alpha, pull the curve to the top lieft" I have to say this is what worked best for
AE cs3 and leopard - what concrete problem?
by Arnljot Bringedal 13 years ago
Im on leopard - and have not found any problems with AEcs3 yet.... Do anyone know what the problem is Have they stated concrete problems What can i expect
Re: AE cs3 and leopard - Adobe's comfortable with you running Leopard
by Brendan Coots 13 years ago
Ron, I think you guys did the right thing by erring on the side of caution, for sure. I was just pointing out that my post showing frustration with Adobe was prompted by it and was therefore a bit mis
SAPPHIRE UB MAC AE?
by Arnljot Bringedal 13 years ago
From what version is sapphire mac ae UB (intel) I am unsure whether ours is UB or not.... regards BEcker *** Norwegian videojournalist & Editor***
Re: SAPPHIRE UB MAC AE?
by Todd Prives 13 years ago
Hi Becker, 1.09 was the UB support release, in either case I recommend you upgrade to our latest release -1.10. It is a free point upgrade and can be downloaded from http: www.genarts.com download-sap
When did genarts sapphire go UB?
by Arnljot Bringedal 13 years ago
I believe i have v1.07 - is it UB Or is it UB from 1.10 only *** Norwegian videojournalist & Editor***
Re: When did genarts sapphire go UB?
by Gary Oberbrunner 13 years ago
It was 1.081 I believe, but in any case 1.10 is a free upgrade from your current version. Just download and install over the existing plug-ins. To transfer to a different Mac, first uninstall from the
Gl-2 ( xm-2 ) zooms by itself - why?
by Arnljot Bringedal 13 years ago
Hey! I leave my canon camcorder on a tripod with a fixed focal length. But.. Somehow it zooms out to wide, by itself, after a while... Come to think of it - all my smaller canon camcorders also behav
Re: Gl-2 ( xm-2 ) zooms by itself - why?
by Matt Devino 13 years ago
I had this same problem with my GL-2, it eventually got worse and worse until the zoom stopped altogether. It ended up being a bad zoom motor, which it turns out is a common problem with that camera.
export cc snow as alpha? for use in flash
by Arnljot Bringedal 13 years ago
Problem: Client wants the cc snow effect as a alpha video clip to lay over different graphics in flash. How do I go about exporting cc snow as alpha And does anyone know how to encode the clip for use
Re: export cc snow as alpha? for use in flash
by Jeff McBride 13 years ago
Get Unmult from here, it's free. Should get rid of the background and let you export as alpha. http: www.redgiantsoftware.com unmult.html
Lightroom: Wanna move ALL images to new drive.
by Arnljot Bringedal 13 years ago
Hey guys! I have 100.000 raw files on a drive in a folder called workpictures. Just purchased a new raid - and wanna move all my files to the new unit. How do I do that, in order to have the lightroo
Remove BCC 4.1 trial - how to?
by Arnljot Bringedal 13 years ago
Hey! Tried ut - liked it - but am not buying it. Have been googling for an uninstall procedure - no luck. Could anyone assist Whenever I use my own limited reasoning for these kinds of problems - I te
Re: Remove BCC 4.1 trial - how to?
by Paul FX 13 years ago
Becker, here is where you will find all the elements of BCC so you can remove it from your system. Delete the items whose name or description appears in "quotations". 1. Hard Drive-Applications- "Bori
AVID on MAC ( INTEL )
by Arnljot Bringedal 13 years ago
Hey! I am a FCP editor myself, BUT: Avid is the leader in the field, so I have decided to start learning avid. The avid website has said ( for a LOOOONG time ) that they are releasing INTEL - products
Re: AVID on MAC ( INTEL )
by Dave Schweitzer 13 years ago
If you're doing your own projects, Xpress Pro is very powerful and can function very well for most all projects. It's what I use for all the projects I take on myself. Media Composer has more powerful
NO video during logging and capture
by Arnljot Bringedal 13 years ago
Using DSR-11 - firewire OHCI. In capture logging mode - i hear audio , but see no video. Any ideas Bit NooB to AVID - normally on FCP *** Norwegian videojournalist & Editor***
AND THE V1 button in capture mode is blue - should it not be red?
by Arnljot Bringedal 13 years ago
Damn AND THE V1 button in capture mode is blue - should it not be red *** Norwegian videojournalist & Editor***
AF7 unable to load BCC4
by Arnljot Bringedal 13 years ago
Hey! After effects 7 on PC - just installed my boris continuum complete v.4.0 - and AF7 say: After effects plugin error - BCC - (and path) - could not be loaded (126) Anyone got a clue *** Norwegian
Re: AF7 unable to load BCC4
by Arnljot Bringedal 13 years ago
Nope - did not work - strange.... Note: I had a clean PC with a fresh XP install - and all service packs. I then installed AF7. I then installed BCC4. I then installed Genarts Sapphire. Result: AE7 se
Ae7 problems loading BCC4
by Arnljot Bringedal 13 years ago
Hey! After effects 7 on PC - just installed my BCC4 - and AF7 say: After effects plugin error - BCC - (and path) - could not be loaded (126) Anyone got a clue *** Norwegian videojournalist & Editor**
BCC4 will not load through after effects 7
by Arnljot Bringedal 13 years ago
Hey! After effects 7 on PC - just installed my BCC4 - and AF7 say: After effects plugin error - BCC - (and path) - could not be loaded (126) Anyone got a clue *** Norwegian videojournalist & Editor***
Re: BCC4 will not load through after effects 7
by peter mcauley 13 years ago
Hello, I can only tell you that from a product standpoint there is total compatibility with BCC and After Effects 7 ... as a matter of fact I have even successfully used BCC 3 and 4 (separately) in AE
© 2020 CreativeCOW.net All Rights Reserved
[TOP]